Video Card Compatability List.

[acehuldarr]

Sapphire Radeon 5750 is working partially after adding 0x68BE1002 to ATI5000Controller and AMDRadeonAccelerator under Juniper family. No QE/CI as of yet. Using GE=Yes.

 

[mt247]

Sapphire Radeon is working partially after adding 0x68BE1002 to ATI5000Controller and AMDRadeonAccelerator under Juniper family. No QE/CI as of yet. Using GE=Yes.

How is that done?!

 

[dky1e]

My HD5750 Sapphire don't work!!!!!!

Does it not work even after adding 0x68be1002 to the ATI5000Controller.kext?

 

[zaborrilla]

Hi,

ASUS EN210 SILENT 1GB working with QE/CI. GE=Yes and PCIRootUID=0.

Regards

 

[acehuldarr]

Does it not work even after adding 0x68be1002 to the ATI5000Controller.kext?

Unlike Lion the ID also needs to be added to AMDRadeonAccelerator.kext under the correct family (Juniper in this case). Even so, QE/CI is still a no-go. I'm wondering if it's related to the multitude of issues that 6xxx cards are running into.

 

[enginerd]

Anyone know if Evga GeForce 550Ti is good?

Mine's working OOB. I did initial Unibeast install on the internal graphics only and then put the 550ti in afterward. I'm running 2560X1440. Did some initial testing (ripple effect, chess, ran cinebench), but haven't really tried everything yet (dual monitor, etc.), but looking pretty good so far.

 

[ypz801]

Sapphire Hd 6970 is preventing the ml to Boot up after Installation was completed.

I did the ATI6000Controller.kext trick but the trick does not solve the issue. With the trick i can install, but after ml has been installed and the kext was put back to the system (according to the "Manual") on the next reboot the System hangs displaying the Apple logo and the rotation. GraphicsEnabler=Yes/No makes no difference...:-/

The 6950/6970 currently only works with a helper card or internal graphics like the Intel HD4000. You need to boot the sytem with the Intel HD4000. You need to set this in the bios of your motherboard. If you have a one monitor setup, you will see no boot post, bios messages etc. Chamelon is using the Intel HD4000 to boot, and then Mountain Lion takes over initializing the 6950/6970. After a minute or so you have the ML desktop. ML thinks it is a two monitor setup..

 

[mecrip]

Sapphire RADEON HD6670 1gb ddr5 works OOB

 

[ryan.kruger]

eVGA GTX 570 HD 2.5 GB Confirmed with GraphicsEnabler=Yes

 

[hiwa]

Msi R6850 1GB - Working with "GraphicsEnabler=Yes"
HDMI with atiports=4 aticonfig=gibba added
First dVI works
Hdmiaudio works
Installed with onboard vga then switch to R6850