macOS Ventura is Now Available From the Mac App Store

[spang1974]

Upgraded from Monterey shortly after release. Upgrade went fine. Broke screensavers (none work, Black screen), and system freezes momentarily when minimizing applications.

 

[chazy]

You have to change the SMBIOS to a closer 2017 or 2019 Mac. Check the forums for the most suitable SMBIOS for your pc specs. Or you can check on everymac.com to look at specs of all Macs to find the closest one that is supported by Ventura.

1. update OC and all kexts with latest versions with current SMBIOS and current OS.
2. log out of iCloud.
3. change the SMBIOS in config file.
4. log into iCloud
5. update to Ventura will be available now. Update.

Thank you for your answer. I can't find a model near mine :/ do you have idea of Wich one? I out the screenshot of specifications on the post up here.
Thanks a lot

 

[nachozarlenga]

The easiest way to update your EFI would be to use HackinDROM, just need to mount the EFI and 'Right Click' on the mouse button, simple.

View attachment 556926

GitHub - Inqnuam/HackinDROM: macOS OpenCore bootloader updater

macOS OpenCore bootloader updater. Contribute to Inqnuam/HackinDROM development by creating an account on GitHub.

github.com

Thanks, i did it last night and works perfectly!

 

[sriHacPro]

Thank you for your answer. I can't find a model near mine :/ do you have idea of Wich one? I out the screenshot of specifications on the post up here.
Thanks a lot

chazy, don't be lazy. read dortania open core install guide.
your profile shows 6600k Skylake processor. so, iMac 18,1 if using integrated GPU, or iMac 18,3 if you have AMD graphics card.

for 18,1 posted my config here.

Haswell Ventura beta Z97X 4790K RX6600XT SUCCESS. HD4600 almost.

Finally I jumped into Ventura, and installed latest beta on a spare volume. 1. downloaded latest public beta8 / dev beta10 and created a usb install disk. 2. got the latest open core 0.8.5, latest kexts, and existing USBports kext, Monterey config with iMac 17,1 smbios 3. had 2 issues. open...

www.tonymacx86.com

 

[almenara1331]

Mine too is not working. I just noticed it.
Solved by disabling the Device Properties associated with the i225.

Hello good afternoon mate, I have the same problem as you, can you tell me how you solved the problem? I find myself stuck. Cheers

 

[artroeb]

You never know until you try.

Upgraded OC 0.7.6 --> 0.8.5.

Then... success

View attachment 556878

Can I see your config?
I try fresh install on external ssd but always reboot when run "macOS Installer" drive.

Thank you.

 

[chow123]

Only thing that doesn't work post update is private relay. It seems on macOS 13 or higher, it's force disabled if there are literally ANY 3rd party kexts installed, which is kind of hard to avoid on a hack. :\

Hi, Can you share your your EFI ?
I have the same motherboard with RX580.
Thank you !

 

[nknueppel]

Easy upgrade, using Opencore 8.5.
First, I installed (upgraded from earlier versions) the following kexts...
AppleALC 1.7.5
Lilu 1.6.2
VirtualSMC 1.3.0
WhateverGreen 1.6.1
BRCMPatchRAM 2.6.4 (no sure if this was necessary; will try removing to see what happens)

The entire upgrade took under a half hour. Everything working so far (audio, wireless).

 

[jayw8888]

OpenCore 0.8.5

Upgraded from Monterey to Ventura via Preferences > Software Update.

Everything went without a hitch. Everything is working fine.

 

[yurid]

Upgrade went easy using OpenCore 0.8.3. It took me about 30 min to do that. After the upgrade, WiFi stopped working, and I continued on Ethernet. After a while, WiFi started working without intervention on my side and worked until I put the rig to sleep. The next day I found the rig woken, and the WiFi was broken again. Still no WiFi. Very confusing.