- Joined
- Jun 1, 2013
- Messages
- 310
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- I7-10700K
- Graphics
- 5600XT & 6800 XT
- Mac
- Mobile Phone
I could do that but I have 2 issues:Hi! I had the same problem with an Asus z490 and RX580. Even sent the board (z490) to RMA twice, they sent it right back, twice I remember CSM solving the issue. But it was not the only thing I messed up with so I'm not totally sure. The issue was more about the BIOS of the graphics card. Something to do with UEFI/Legacy stuff. I would check the GPUs firmware update, and the boards if there is any. Update both. Then try CSM again. I don't know if your boards BIOS has any options around it, if there is, check them also. When I upgraded to a 5700XT, CSM didn't matter. but I couldn't make RX580 work without it, I mean accessing the BIOS and boot options etc., system was working otherwise. I remember being frustrated a lot, hope you won't. Good luck!
- i will need to connect my 6800 xt to the monitor via HDMI in order to select windows
- I have an issue with windows and the logging screen. When you press enter to enter your password, the logging screen usually gets blurry and your have the input field to enter your pwd or pin. Except that in my case, a while ago suddenly out of the blue, the screen went blurry but I have no input field to enter my pwd. This is a common issue in windows