- Joined
- Jan 9, 2016
- Messages
- 119
- Motherboard
- Cube mix plus
- CPU
- M3-7y30
- Graphics
- HD 615, 1920 × 1080
Hi,
I have some issues with Big Sur that I didn't have with Catalina.
The system is a Cube Mix Plus with a M3-7Y30 (Kaby Lake)
First of all the installation process was very slow, Catalina, in this system, takes 40 minutes to install. In contrast big sur needed 2 hours.
However I successfully installed big sur. It takes at least 5 minutes(for Catalina less than a minute) to boot and booting in verbose this is the result.
There is that line that says ACPI_SMC_PlatformPlugin is stalled and all the tx_flush etc that I don't know if are normal (in another laptop that has no problem these lines are not called in verbose).
I tried to inject only the kext strictly needed to boot, I removed the SSDT but the result is the same in the log and the booting process is still slow.
Morover, when big sur boots, I have other issues. The audio is not working. In particular only 1 over 3 times the mic is recognized and in the sound settings the internal speaker is shown, sadly the speaker, even in this case, doesn't work while the headphones work; 2 over 3 times instead big sur doesn't detect anything related to audio.
Last thing. I set that the internal drives have to show in the desktop. It actually work but I can see only the labels, the drive icon is not shown.
P.s. the AppleALC kext in this folder is a self compiled one that works just fine in Catalina, this is because I use a self-made profile pending in github to be approved. I tried also the official kext using the profile id 3. This profile works on my system but mic is broken, however also in this case I have the same problem as above (except the mic that doesn't work all the times obv).
From Catalina the only thing I changed is Sata-unsupported to CtlnaAHCIPort.
Thanks for your help, I attach the log and my EFI folder with Clover(I removed the Serial Number I use for the SMBIOS).
I have some issues with Big Sur that I didn't have with Catalina.
The system is a Cube Mix Plus with a M3-7Y30 (Kaby Lake)
First of all the installation process was very slow, Catalina, in this system, takes 40 minutes to install. In contrast big sur needed 2 hours.
However I successfully installed big sur. It takes at least 5 minutes(for Catalina less than a minute) to boot and booting in verbose this is the result.
There is that line that says ACPI_SMC_PlatformPlugin is stalled and all the tx_flush etc that I don't know if are normal (in another laptop that has no problem these lines are not called in verbose).
I tried to inject only the kext strictly needed to boot, I removed the SSDT but the result is the same in the log and the booting process is still slow.
Morover, when big sur boots, I have other issues. The audio is not working. In particular only 1 over 3 times the mic is recognized and in the sound settings the internal speaker is shown, sadly the speaker, even in this case, doesn't work while the headphones work; 2 over 3 times instead big sur doesn't detect anything related to audio.
Last thing. I set that the internal drives have to show in the desktop. It actually work but I can see only the labels, the drive icon is not shown.
P.s. the AppleALC kext in this folder is a self compiled one that works just fine in Catalina, this is because I use a self-made profile pending in github to be approved. I tried also the official kext using the profile id 3. This profile works on my system but mic is broken, however also in this case I have the same problem as above (except the mic that doesn't work all the times obv).
From Catalina the only thing I changed is Sata-unsupported to CtlnaAHCIPort.
Thanks for your help, I attach the log and my EFI folder with Clover(I removed the Serial Number I use for the SMBIOS).