pastrychef's Asus ROG Strix Z370-G Gaming (WI-FI AC) build w/ i9-9900K + AMD 6600 XT

[fbud]

Thank a lot my friend!!! You solved the problem.
Just installed on my ssd. seems to work perfectly

Thank a lot my friend!!! You solved the problem.
Just installed on my ssd. seems to work perfectly

One question. I'm using your Clover 5122 (the 5126 version causes kp).
The system seems to be working, except for the sleep and the bluetooth (I'm using an external usb atheros bluetooth) that sometimes work and sometimes make the system freeze.
I'm using your config.plist (not edited).
Do I have to change something in the config file?

I'm running native 10.15.7

 

[pastrychef]

Do I have to change something in the config file?

You shouldn't have to. If the Bluetooth is working then, the USB port is working.

I've never tried using an external Bluetooth dongle so I don't know how well (or poorly) they work.

 

[Trauman]

I don't know why it's doing that for you... Everything in your EFI looks fine to me.

Ok, after some reboots it seems to have fixed itself. Now the system shuts down properly. Thanks again for your help an patience!

 

[pastrychef]

you know why my gpu shows wrong ?
all seems to be stable now, switched to opencore 0.6.3 and updated to 10.15.7

You have your video card installed in the the third PCI-e slot??

Delete everything in config.plist > DeviceProperties > Add except for "PciRoot(0x0)/Pci(0x1F,0x3)".

 

[pastrychef]

New Supplemental Update...

Two reboots and ~17 minutes... (I'm on OpenCore 0.6.3.)

 

[dclive]

Same here - trivial update, Clover 1522.

 

[Huitzilopochtli]

Clover EFI updated to r5126.

Tested with Catalina 10.15.7 and latest Big Sur Public Beta.

Do not use your existing config.plist. Instead, copy/paste your SMBIOS info from your current config.plist to the new one included in the zip file. Remember to also set the system definition to the one that you are currently using.

To be safe, please test this EFI on a USB flash drive before deleting your existing one.

So how does work? Is it safe to update to Clover r5126 or should I better stay at 5119?

 

[pastrychef]

So how does work? Is it safe to update to Clover r5126 or should I better stay at 5119?

I've only done limited testing and it seems fine. I've pretty much switched to OpenCore for everyday use.

Just make a backup of your Clover r5119 EFI so you can go back to it if you experience any problems. But I think you'll be fine.

 

[dclive]

I went from 5122 to 5126 (5125?) and ran into a no-boot situation - saw the picklist with the disks, but selecting a disk and then nothing happened, IIRC, so I had to roll back within Windows and my backup EFI folder. Not fun. I'm holding off for now.

 

[pastrychef]

I went from 5122 to 5126 (5125?) and ran into a no-boot situation - saw the picklist with the disks, but selecting a disk and then nothing happened, IIRC, so I had to roll back within Windows and my backup EFI folder. Not fun. I'm holding off for now.

You used the Clover r5126 EFI on post #1? Please post a photo of verbose boot where it gets stuck.

I couldn't get any of the previous releases to work either but r5126 does work for me.