Installer Boot Error AAPL,CoProcessorReboot and GV awake-failure

[RaisGeb]

Hello All,

I am just new to hackintosh and about to start my first project.

My target hardware:

Fujitsu Desktop Computer ESPRIMO P710
i5-3570 Ivy Bridge CPU
DS3161-A1 Fujitsu mainboard
Radeon RX550 graphics (internal Intel Graphics disabled by BIOS)
Bios American Megatrends Inc V4.6.5.3
Bios Mode: a bit unclear... When entering BIOS I see UEFI settings. But Windows System Information tells me that BIOS uses legacy mode. But I guess that means that Windows uses BIOS mode

I installed Clover and Catalina Installer on USB Stick (32GB) with Unibeast 10.1.0. I got Catalina Install App via macOS Catalina Patcher (dosdude1.com).

When I boot my machine with the USB Stick inserted it starts Clover. It also shows the EFI device. When I boot from this device, boot process pretty soon stops with some errors:

[EB|`PCCPR] Err(0xE) @ GV AAPL,CoProcessorReboot
...
[EB|`WLWLFNV] Err(0xE) @ GV wake-failure

Screenshot attached as well.

I already tried to alter the Clover boot options, that can be accessed by pressing space.
I also checked the BIOS Settings. But I could not identify settings, beside v-td disable, which I shall adopt.

Could anybody give me a hint what I shall try next?

Thanks a lot for your support.

 

[thbak]

I have the same problem - updated directly to Catalina from a working installation and now seeing this error. Any help is very welcome.

 

[donw35]

share your EFI Folder, I will have a look

 

[thbak]

This is mine - if you're willing to take a look, that would be great. I must admit that my original installation happened some time ago, and I have forgotten most of the reasons for choosing the settings I have. @donw35

Edit: updated with the correct folder.

 

[donw35]

try this CLOVER folder, just reman your CLOVER folder to CLOVEROLD and put this one in the same directory, let me know if it works

 

[hitch21]

I seem to have exactly the same problem. My installation was fine, but yesterday I upgraded clover from 5107 to 5108 and VirtualSMC from 1.1.1 to 1.1.2.
I tried going back to 5107 (I changed the CLOVERX64.efi, BOOTX64EFI).
And tried going back to VirtualSMC 1.1.1. Fot his I was only able to change the kext files in EFI\CLOVER\kexts\Other\. I can not access OSX Dick\Library\Extensions from Windows (I have a copy of the kexts in there).
But that did not help.

 

[donw35]

sometimes when updating clover you will lose some files in the drivers/UEFI folder, this is probably why your boot is broken, you will need to get that drive mounted in to a Mac or Hackintosh or create a boot USB to get back and fix the problem.

 

[hitch21]

I've created recover USB and fully recovered Clover EFI 5107 from the backup that the installer creates and also deleted the SMC* and VirtualSMC kexts from /Library/Extensions.
But still having the same issue. It won't boot.
I recorded the verbose log and the first error is:
EB Err(0xE) 0 GV boot-signature

Do I need to restore the boot.efi too? If so how can I do it?

The end of the error log is:

 

[thbak]

try this CLOVER folder, just reman your CLOVER folder to CLOVEROLD and put this one in the same directory, let me know if it works

I cannot thank you enough - after copying your CLOVER folder, I can now boot. Now, though, I am stuck after entering my password where the small loading wheel just keeps spinning. I have searched around for answers to that, and there are a few guides that I might try out, deleting some "csstor" files and having the OS rebuild them. I am somewhat cautious about deleting files like that, but if that's the way to go, I guess I'll have to try

 

[donw35]

Press F11 at clover to clear NVRAM. See if that helps.