- Joined
- Mar 26, 2020
- Messages
- 10
- Motherboard
- HP 250 G5
- CPU
- Intel Core i3 5005U
- Graphics
- Intel HD 5500
- Mobile Phone
Hi,
Catalina is installed well with the RehabMan base config.plist for the iGPU HD 5500 and your guide (thx @RehabMan), but i have been trying for everything to work on my laptop for a week, and the only things that i have managed to make work, is the percentage of the battery with the ACPIBatteryManager.kext, and the ethernet with the RealtekRTL8111.kext by RehabMan also.
The trackpad, also use the RehabMan VoodooPS2Controller.kext because is the only one that works well on my laptop.
I have read tons of guides through this forum and the internet, but I'm not able to make anything work. Video acceleration, audio and brightness (these 3 functions are the things that most interest for me).
My specs:
Motherboard: HP 250 G5
CPU: Intel Core i3-5005U (Broadwell)
iGPU: HD Intel 5500
RAM: 2x4GB
Audio codec: ALC3227 from Linux. Googling, i read that is equivalent to ALC233, but idk that is true.
Video tests:
If i start the macOS with the correct ig-platform-id for my GPU (0x16260006), the image is distorted and the log shows "[iGPU] Grpahics driver failed to load: could not register with the framebuffer driver" (graphics_ko.jpg), so i have to start with a fake ig-platform-id (0x12345678). In the system summary shows 7MB VRAM.
My L/E/ kexts right now:
Sorry for my bad English.
Any suggestions??
I think I don't forget anything
Thx u so much!!
Best regards.
Catalina is installed well with the RehabMan base config.plist for the iGPU HD 5500 and your guide (thx @RehabMan), but i have been trying for everything to work on my laptop for a week, and the only things that i have managed to make work, is the percentage of the battery with the ACPIBatteryManager.kext, and the ethernet with the RealtekRTL8111.kext by RehabMan also.
The trackpad, also use the RehabMan VoodooPS2Controller.kext because is the only one that works well on my laptop.
I have read tons of guides through this forum and the internet, but I'm not able to make anything work. Video acceleration, audio and brightness (these 3 functions are the things that most interest for me).
My specs:
Motherboard: HP 250 G5
CPU: Intel Core i3-5005U (Broadwell)
iGPU: HD Intel 5500
RAM: 2x4GB
Audio codec: ALC3227 from Linux. Googling, i read that is equivalent to ALC233, but idk that is true.
Video tests:
If i start the macOS with the correct ig-platform-id for my GPU (0x16260006), the image is distorted and the log shows "[iGPU] Grpahics driver failed to load: could not register with the framebuffer driver" (graphics_ko.jpg), so i have to start with a fake ig-platform-id (0x12345678). In the system summary shows 7MB VRAM.
- I tried to configure the config.plist follow this guide.
- Also tried this guide.
- I tried to change the framebuffer memory following this guide, but my BIOS don't allow me to change values. Also searching for a hacked BIOS with Advanced menu, but impossible to find.
- Tons of YoutTube videos and ****** posts.
- Like the video test, tons of videos in YouTube.
- AppleHDA Patcher.
- Hackintool don't recognize nothing (hackintool_sound_empty.jpg).
- Following the same guide that follow for the audio (But nothing happens xD).
- AddPNLF active.
- Added SSDT-PNLF.aml to the patched folder.
- Check SetIntelBacklight and SetIntelMaxBacklight inside Devices.
My L/E/ kexts right now:
Sorry for my bad English.
Any suggestions??
I think I don't forget anything
Thx u so much!!
Best regards.