Lenovo Thinkpad P53 stuck at endrandomseed on installer

[kylec]

but when I figure out which is A and B, then what?

You would move the module in B2 to A1, and delete the SMBIOS memory workaround that you just completed. But in practice, the difference between single channel and dual channel performance is not that big, so you might want to just forget everything I said.

 

[jc123]

You would move the module in B2 to A1, and delete the SMBIOS memory workaround that you just completed. But in practice, the difference between single channel and dual channel performance is not that big, so you might want to just forget everything I said.

I'll keep that in mind for sure if the performance is lacking thanks for the insight man

 

[jc123]

pop the attached in acpi/patched folder

also make sure to use a USB2.0 stick, and try all your ports, make sure USBInjectAll.kext is in clover/kexts/other

I'm using usb 2.0 16gb and its running really fast now instead of stopping at afps module start. It's really hard for me to get a slow mo of it, but at the end it says attempting system restart. then it immediately boots into windows.

 

[jc123]

pop the attached in acpi/patched folder

also make sure to use a USB2.0 stick, and try all your ports, make sure USBInjectAll.kext is in clover/kexts/other

Is there another way I can show you what's happening?

 

[jc123]

pop the attached in acpi/patched folder

also make sure to use a USB2.0 stick, and try all your ports, make sure USBInjectAll.kext is in clover/kexts/other

this is the best screenshot i could get from the slowmo i took from my phone sorry for the quality, let me know if u want more problem reporting files

 

[Feartech]

this is the best screenshot i could get from the slowmo i took from my phone sorry for the quality, let me know if u want more problem reporting files

your VoodooPS2Controller is too old, use a later version

 

[jc123]

your VoodooPS2Controller is too old, use a later version

Sorry I passed out last night I had been up for like 36 hours. I updated all my kexts and I've reached another stopping point that reads - IOConsoleUsers: GIOScreenLockState, hs 0, bs 0, now 0, sm 0x0. After a while it reboots. Image and clover folder attached.

 

[jc123]

your VoodooPS2Controller is too old, use a later version

I tried uncommenting intelgfx under fakeID and changed the value to 0x12345678 as well as changing my ig-platform-id to the same and it now gets to the installer, but it blacks out and reboots after 5-6 seconds.

My graphics is UHD P630, not UHD 630, not sure if this could cause an issue.

processor

 

[jc123]

reverting the previous and uncommenting ig-platform-id only and changing it to 0x12345678 has brought me to the installer now without crashing after a few seconds. installing now; will update.

 

[jc123]

your VoodooPS2Controller is too old, use a later version

Ok, so it crashed during the installer after the second reboot, now if I choose install Mac OS from Mojave (my drive name) it says mojave can't be installed on your system because the installer resources could not be found. I retried the entire process and it sometimes crashes and reboots on the language selection screen, sometimes not. Guessing its a graphics issue with the invalid ig-platform-id. Is there any other solution for this?