When the KP happens it will display all the info to post here. If your machine resets when a KP occurs you will need to apply patches so it doesn't.
I have finally given up in attempting to solve the instability problem of my Skylake build by myself. During the last 24 hour period the machine KP'ed 6 times whilst unattended and sleeping. here follows a summary:
BSD process name corresponding to current thread.
KP-1 loginwindow
KP-2 launchd
KP-3 mds
KP-4 BluetoothUIServe
KP-6 mds
KP-7 mds
Kindly note that the 6 KP's can be grouped into 2 sets of three. The first KP of the first set occurred on 21-05-2019 at 05.35 followed by 2 others in quick succession because in Energy Saver "Start up automatically after a power failure" is enabled.
The second set of three KP's occurred at 09.00, again followed by 2 others in quick succession.
The first KP of each of the two sets have been attached and can be found in the file Archive.zip
The file Debug-3042.zip contains the problem reporting files as generated by "gen_debug -sysprofile"
The instability first surfaced from around Mojave 10.14.2/3, with nothing that I tried, fixing the issue. I then stumbled across this thread and was hoping by applying the new "connectorless" framebuffer patches, as per this thread, that the problem would be solved, however it was not to be.
I cannot rule out that somehow or other a serious configuration error slipped in which I am unable to discover by myself. The cause may even be some or other imminent hardware failure, however when the machine is in constant use during daytime it remains stable.
Assistance in finally resolving this issue will be highly appreciated.
Greeetings