pastrychef
Moderator
- Joined
- May 29, 2013
- Messages
- 19,460
- Motherboard
- Mac Studio - Mac13,1
- CPU
- M1 Max
- Graphics
- 32 Core
- Mac
- Classic Mac
- Mobile Phone
There you go, thanks for the help!
Please try with this config.plist.
There you go, thanks for the help!
Please try with this config.plist.
Hmm... Very strange... Is this a clean install of Mojave 10.14.4?
Judging by the ioreg, it should be working...
It is a clean install in the sense the dmg was downloaded with an original mac and no MB/UB tools were used.
I am using this machine for a couple of months now, so it is loaded with software & files.
Other than this all is working well, I did notice H.264 exports were slow & FCPX was dropping frames (while playing high res files & speed ramps however), that's why I started looking into it.
BruceX export times were acceptable.
This screengrab shows IGPU/GPU not working when exporting H.264 in FCPX.
Could you suggest me ways to check if the performance matches HW Encoding enabled or should I go ahead and try with a clean install?
Thanks again
Hi, I am recently did a clean install of High Sierra and used your (pastrychef) EFI folder, than I have successfully updated to Mojave, also used your EFI. My build is a little bit different as yours, so far look okay, I would start testing right now, my question would you would recommend to change in the config? I am a newbie in the hackintosh world, so I would really appreciate your help.
System information looks okay, the Hackintool shows also GPU is fully supported but what strange is there no GPU name, ID and VRAM size:1. Make sure you have video acceleration working. Check System Information > Graphics/Displays to see if it shows Metal as being supported. Also check Hackintool to see if VDA Decoder is supported.
Sleep/wake working great.3. Test to see if sleep/wake is working.
Audio is also working after sleep. But what I have tested (before sleep) all jack outputs at back panel and only the "Internal Speakers" front output is working. Front panel audio jack has no sound, but I am also not able to select it in the sound preferences. (HDMI, DVI and SPDIF audio are working fine)4. Test to see if audio is working after sleep.
Regarding the USB I am not pretty sure, because I have connected an Anker USB 3 hub on HS06 and it shows as USB 2 hub, and I have just did a speed test with Blackmagic and shows, 32MB/s write speed and 36MB/s read speed, it looks for me a little bit slow. Am I right the HSxx is the USB 2.0 port and SSxx would be the USB 3.0?2. Make sure all your USB ports are working. You can use Hackintool to test.
Thanks your fast reply.
System information looks okay, the Hackintool shows also GPU is fully supported but what strange is there no GPU name, ID and VRAM size:
View attachment 404413
There are two other things regarding GPU:
- iStat (also HWmonitor) shows that GPU die temperature is 127C
- And sometimes the GPU fans are spinning quite fast, without any reason, e.g. if I am just surfing (during this reply also did it). Should I follow this guide?
https://www.tonymacx86.com/threads/guide-injection-of-amd-vega-power-and-fan-control-properties.267519/
Sleep/wake working great.
Audio is also working after sleep. But what I have tested (before sleep) all jack outputs at back panel and only the "Internal Speakers" front output is working. Front panel audio jack has no sound, but I am also not able to select it in the sound preferences. (HDMI, DVI and SPDIF audio are working fine)
Regarding the USB I am not pretty sure, because I have connected an Anker USB 3 hub on HS06 and it shows as USB 2 hub, and I have just did a speed test with Blackmagic and shows, 32MB/s write speed and 36MB/s read speed, it looks for me a little bit slow. Am I right the HSxx is the USB 2.0 port and SSxx would be the USB 3.0?
View attachment 404415