The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build

[aztlan78]

You make sense. That EFI in Post #1 is for the last update, right? I will replace my current EFI with the one you provided and will report back. Thanks again for your help and support!

 

[ModMike]

You make sense. That EFI in Post #1 is for the last update, right? I will replace my current EFI with the one you provided and will report back. Thanks again for your help and support!

First, I like to think so, and second my pleasure. As always, let the thread know how it worked out.

 

[ModMike]

Try this to rule out any other issues by dropping the EFI onto a fat32 formatted USB drive by itself and try to boot. If you can't get there then at least that narrows things down.

 

[ModMike]

You are driving your self crazy. If you can't boot with an EFI on a fat 32 BIOS then you need to fix that before anything. Attached is a patchless version, I suspect they may be messing you up. I just remembered I had to apply them after.

If you can boot, I need to make you one more to validate something if you don't mind.

 

[aztlan78]

First, I like to think so, and second my pleasure. As always, let the thread know how it worked out.

It didn’t work. Boot is stuck on the Apple logo now. Cannot get into Mojave.

 

[ModMike]

I think

It didn’t work. Boot is stuck on the Apple logo now. Cannot get into Mojave.

As I stated above, I think patches need to be applied after install. Drop this one in and everything should be good.

 

[aztlan78]

I think

As I stated above, I think patches need to be applied after install. Drop this one in and everything should be good.

Didn't work either. Luckily I had the copy of the old EFI that was working and I was able to go back to that. I had to use that other USB FAT32 that I still had to boot in and change EFIs.

 

[ModMike]

Didn't work either. Luckily I had the copy of the old EFI that was working and I was able to go back to that. I had to use that other USB FAT32 that I still had to boot in and change EFIs.

I have no idea what I did to break it. I need to figure this out. Where you ate least able to boot to Clover with the special EFI I sent? The only thing I did was use news versions of WhatEverGreen that Hackintools compiled for me, but my system boots perfectly so I don't understand. I will look into the one I sent you.

Edit: I think I know, I switched to VirtualSMC from fake SMC. I will check it out.

 

[aztlan78]

I have no idea what I did to break it. I need to figure this out. Where you ate least able to boot to Clover with the special EFI I sent? The only thing I did was use news versions of WhatEverGreen that Hackintools compiled for me, but my system boots perfectly so I don't understand. I will look into the one I sent you.

Edit: I think I know, I switched to VirtualSMC from fake SMC. I will check it out.

I did notice that too. I wasn't sure if that was an issuer though. Give me a sec. I will try again and this time I will change from Virtual to Fake on my build. Will report back soon.

 

[aztlan78]

I did notice that too. I wasn't sure if that was an issuer though. Give me a sec. I will try again and this time I will change from Virtual to Fake on my build. Will report back soon.

Ok. So I did replace the kext and I was able to boot in successfully. That was the issue. But I did notice that in the config.plist the Port Limit Patches are not there. Also when it comes to sound I still don't have regular Audio. I only have HDMI Audio.