- Joined
- Apr 7, 2017
- Messages
- 3
- Motherboard
- Gigabyte Z370-HD3
- CPU
- Core i7-8700K
- Graphics
- Giagabyte GTX 1080
Hi,
First of all, sorry for my bad English; not my mother language.
I have just finished installing my new Hackintosh and everything seems to work great. But I have an annoying problem and can not solve it.
Although computer works great, shutdowns with no problem, and starts up smoothly, each time computer restarts, I get the alert: “Your computer was restarted because of a problem”. This is the log (part of it, full log attached):
As far as I know, and after searching the forum I think this is related to GPUSensors 1737 (v 6.25) does not support my pascal Gigabyte 1080 Windforce. But what I do not understand is I have not installed GPUSensors. I do not know if FakeSMC has this inside, but that is the only Kext installed related to hardware sensors.
Anyway, after reading the forum I think that FakeSMC and FakeSMCPlugins v6.26 supports pascal graphics cards. So, I did a new fresh installation, and I checked that Multibeast had FakeSMC & FakeSMCPlugins v 6.26. I also checked that EFI partition on USB installation disk had FakeSMC kext v 6.26 in the Clover/kexts/other folder. But after installation, on the firs reboot, the same alert.
I have also tried a new fresh installation, this time installing only FakeSMC v 6.26 (no FakeSMCPlugins), but again the alert is back. I have also copied manually FakeSMC and FakeSMCPlugins in the EFI partition of the HDD, in Clove/kexts/other folder to be sure that these are the kexts that load, but again the same alert on every startup; and I think kexts are loaded with the right versions:
The log of the kernel panic includes the following:
But if I look for the GPUSensors 1737 in my hard drive I got nothing…. I do not understand why, if I have installed FakeSMC GPUSensors 1765, the kernel panic log informs of a GPUSensors 1737
I am lost, and although computer works great, is annoying seeing on every start up the panic alert.
Any ideas? My knowledge on Hackintosh is very limited and I am stuck.
Thanks in advance,
First of all, sorry for my bad English; not my mother language.
I have just finished installing my new Hackintosh and everything seems to work great. But I have an annoying problem and can not solve it.
Although computer works great, shutdowns with no problem, and starts up smoothly, each time computer restarts, I get the alert: “Your computer was restarted because of a problem”. This is the log (part of it, full log attached):
Code:
xffffff83a0fb3e80 : 0xffffff800566ae51
0xffffff83a0fb3f00 : 0xffffff800566a377
0xffffff83a0fb3f50 : 0xffffff800566bf86
0xffffff83a0fb3fa0 : 0xffffff80050014f7
Kernel Extensions in backtrace:
org.hwsensors.driver.GPUSensors(1737.0)[0ED3220B-D868-3130-BDE0-0512761B787D]@0xffffff7f88688000->0xffffff7f88699fff
dependency: com.apple.iokit.IOACPIFamily(1.4)[8794C760-FDD9-3664-ADED-4A9BBEC6E517]@0xffffff7f858dd000
dependency: com.apple.iokit.IOPCIFamily(2.9)[C08F7FC1-78A4-3A1B-BFE2-C07080CF2048]@0xffffff7f858e6000
dependency: org.netkas.driver.FakeSMC(1765)[9EEC6103-EEBA-34B3-B9AF-8FE333C43E90]@0xffffff7f88677000
BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 nv_disable=1 kext-dev-mode=1 -v root-dmg=file:///Install%20macOS%20High%20Sierra.app/Contents/SharedSupport/BaseSystem.dmg
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 17.3.0: Thu Nov 9 18:09:22 PST 2017; root:xnu-4570.31.3~1/RELEASE_X86_64As far as I know, and after searching the forum I think this is related to GPUSensors 1737 (v 6.25) does not support my pascal Gigabyte 1080 Windforce. But what I do not understand is I have not installed GPUSensors. I do not know if FakeSMC has this inside, but that is the only Kext installed related to hardware sensors.
Anyway, after reading the forum I think that FakeSMC and FakeSMCPlugins v6.26 supports pascal graphics cards. So, I did a new fresh installation, and I checked that Multibeast had FakeSMC & FakeSMCPlugins v 6.26. I also checked that EFI partition on USB installation disk had FakeSMC kext v 6.26 in the Clover/kexts/other folder. But after installation, on the firs reboot, the same alert.
I have also tried a new fresh installation, this time installing only FakeSMC v 6.26 (no FakeSMCPlugins), but again the alert is back. I have also copied manually FakeSMC and FakeSMCPlugins in the EFI partition of the HDD, in Clove/kexts/other folder to be sure that these are the kexts that load, but again the same alert on every startup; and I think kexts are loaded with the right versions:
Code:
kextstat | grep org
16 4 0xffffff7f80d28000 0x12000 0x12000 org.netkas.driver.FakeSMC (1765) 9EEC6103-EEBA-34B3-B9AF-8FE333C43E90 <11 7 5 4 3 1>
87 0 0xffffff7f80ea8000 0x8000 0x8000 org.hwsensors.driver.ACPISensors (1765) FA4DF6C0-0D3A-3CE2-8569-0AB2C84053E7 <16 11 7 5 4 3>
95 0 0xffffff7f80d3e000 0x5000 0x5000 org.hwsensors.driver.CPUSensors (1765) AB5DE333-8AC8-3549-86E5-C5647AACA61F <16 7 5 4 3>
103 0 0xffffff7f80fd7000 0xe000 0xe000 org.hwsensors.driver.LPCSensors (1765) 93417250-FFB4-39DA-8B25-F164DE72E120 <16 12 11 7 5 4 3>
114 0 0xffffff7f80d45000 0x12000 0x12000 org.hwsensors.driver.GPUSensors (1765) 714EA7DC-0CED-3374-AC08-B1D6EC33D53B <16 12 11 7 5 4 3>The log of the kernel panic includes the following:
Code:
Kernel Extensions in backtrace:
org.hwsensors.driver.GPUSensors(1737.0)
…
loaded kexts:
com.insanelymac.IntelMausiEthernet 2.3.0
org.hwsensors.driver.GPUSensors 1737
org.netkas.driver.FakeSMC 1765But if I look for the GPUSensors 1737 in my hard drive I got nothing…. I do not understand why, if I have installed FakeSMC GPUSensors 1765, the kernel panic log informs of a GPUSensors 1737
I am lost, and although computer works great, is annoying seeing on every start up the panic alert.
Any ideas? My knowledge on Hackintosh is very limited and I am stuck.
Thanks in advance,
)