[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[y010204025]

The files you attached prove you did not use download.sh and install_downloads.sh.
Start over and follow the guide as written.

Hi！RehabMan，Thank you again for your reply. After the normal operation is completed, the d_bug information has been re-uploaded to the original reply.

 

[y010204025]

I installed the os version is 10.14.2

 

[RehabMan]

Hi！RehabMan，Thank you again for your reply. After the normal operation is completed, the d_bug information has been re-uploaded to the original reply.

New debug info and problem report should be attached to current reply, not old post.

 

[y010204025]

sorry！

 

[RehabMan]

Sorry!

Why are there two separate debug zip files?
You also need to provide details on the problem.

 

[y010204025]

Why are there two separate debug zip files?
You also need to provide details on the problem.

I removed the ZIP with the problem, maybe it was a problem when I uploaded it.
This sound card is not driven and no HDMI output
The touchpad recognizes, but it doesn't work
Thunderbolt3-Type-C is not recognized
The camera has been identified but it is not working
Unable to sleep

 

[RehabMan]

I removed the ZIP with the problem, maybe it was a problem when I uploaded it.
This sound card is not driven and no HDMI output
The touchpad recognizes, but it doesn't work
Thunderbolt3-Type-C is not recognized
The camera has been identified but it is not working
Unable to sleep

Your kextcache proves that AppleALC.kext is not installed.
And since download.sh and install_downloads.sh will definitely install it, it means you deleted it.
Run download.sh and install_downloads.sh again, as per post #1.

 

[y010204025]

Your kextcache proves that AppleALC.kext is not installed.
And since download.sh and install_downloads.sh will definitely install it, it means you deleted it.
Run download.sh and install_downloads.sh again, as per post #1.

Sorry for this，I checked that it seems that the file was incomplete because the server was disconnected during the download.
The audio is normal! Great, maybe the server was broken during the process of downloading the file.
It is normal now, the remaining questions are described:
The HDMI output to the display color is abnormal and emits red. No HDMI audio output
USB3.0 speed does not seem to be correct
The touchpad recognizes, but it doesn't work
Thunderbolt3-Type-C is not recognized
The camera has been identified but it is not working
Closing the lid does not go into sleep mode
The external mouse sometimes drifts; the left and right buttons are misplaced.
The brightness adjustment does not seem to be normal, the regulating valve is present, but the brightness does not change.
Clover boot guide the second phase will bloom，Battery power has not changed

 

[RehabMan]

USB3.0 speed does not seem to be correct
...
The camera has been identified but it is not working

Check USB configuration as per post #1, "USB customization".

Closing the lid does not go into sleep mode

Keep in mind 15-20 sec delay before sleep can be expected.

The external mouse sometimes drifts; the left and right buttons are misplaced.

Might be device specific problem.

The brightness adjustment does not seem to be normal, the regulating valve is present, but the brightness does not change.

Read additional tips regarding fake display id in EDID, fake ALS, as per guide:
https://www.tonymacx86.com/threads/...ontrol-using-applebacklightfixup-kext.218222/

Thunderbolt3-Type-C is not recognized

Hotplug issue, probably.
Test with device plugged prior to boot.

Clover boot guide the second phase will bloom，Battery power has not changed

No idea what you're referring to. You will need to provide details and a coherent description.

 

[y010204025]

Check USB configuration as per post #1, "USB customization".



Keep in mind 15-20 sec delay before sleep can be expected.



Might be device specific problem.



Read additional tips regarding fake display id in EDID, fake ALS, as per guide:
https://www.tonymacx86.com/threads/...ontrol-using-applebacklightfixup-kext.218222/



Hotplug issue, probably.
Test with device plugged prior to boot.


No idea what you're referring to. You will need to provide details and a coherent description.

Thank you! I will check these questions carefully according to the guide.
When the clover boots osx, the display will flash，Regarding the trackpad, what if I want to drive it? I read some guidelines on the I2C trackpad and need to modify the DSDT.