[Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

[schlotterp]

Does anyone else have ethernet drop out / speed issues using the built in NIC?

Yes

 

[thanman]

Yes

My issue is when I first boot up, the internet speed is fast and snappy. Shortly after (1-2 minutes) it goes to a crawl and webpages fail to load. I'm on a 100Mb connection and the same webpage on my MacBook Pro loads instantly. I've resorted to using a USB-C to GbE adapter for time being which is flawless and doesn't require kext injection.

 

[RehabMan]

I'm new to the Hackintosh community, this is my first post. Thank you all and especially RehabMan for the instructions and help.

I followed the instructions for my NUC 7i5BNK, everything went well as described, I'm impressed. My Hackintosh starts now and then in a "loop". When the loading bar shows it loads a bit and then jumps back to the Intel screen, this about 3 to 4 times. Then it boots "normally". After I log in I get the message that the Hackintosh wasn't properly booted. It happens once in a while.

Greetings
schlotterp

No ioreg in this debug zip. Please check your files carefully before upload.

But your config.plist is not from the guide. Read post #1, "Final config.plist".

 

[RehabMan]

I'm on a 100Mb connection

Use 1000baseT connection instead. Or you could try setting manual settings to 100baseT.

 

[schlotterp]

No ioreg in this debug zip. Please check your files carefully before upload.

But your config.plist is not from the guide. Read post #1, "Final config.plist".

Here is the debug.zip with ioreg and the config.plist from the guide. Thanks.

Greetings
schlotterp

 

[jsuisgeek]

Does anyone else have ethernet drop out / speed issues using the built in NIC?

It depends on BIOS settings I had the same thing yesterday

 

[RehabMan]

Here is the debug.zip with ioreg and the config.plist from the guide. Thanks.

Greetings
schlotterp

Your config.plist is wrong (it is for the installer USB).
Read post #1, "Final config.plist".

Also, you installed some kexts incorrectly. From your kextcache output:

Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6b1540140 [0x7fffab5b58f0]> { URL = "FakeSMC.kext/ -- file:///System/Library/Extensions/", ID = "org.netkas.driver.FakeSMC" }
FakeSMC.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6b14730d0 [0x7fffab5b58f0]> { URL = "FakeSMC_CPUSensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.CPUSensors" }
FakeSMC_CPUSensors.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6b10c8c80 [0x7fffab5b58f0]> { URL = "FakeSMC_ACPISensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.ACPISensors" }
FakeSMC_ACPISensors.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6b1462110 [0x7fffab5b58f0]> { URL = "FakeSMC_GPUSensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.GPUSensors" }
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6b10b65f0 [0x7fffab5b58f0]> { URL = "GPUSensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.GPUSensors" }
GPUSensors.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6af5e8a20 [0x7fffab5b58f0]> { URL = "FakeSMC_LPCSensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.LPCSensors" }
FakeSMC_LPCSensors.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7fa6af5a71c0 [0x7fffab5b58f0]> { URL = "FakeSMC_SMMSensors.kext/ -- file:///System/Library/Extensions/", ID = "org.hwsensors.driver.SMMSensors" }
FakeSMC_SMMSensors.kext does not authenticate; omitting.

Delete the kexts you put in /System/Library/Extensions (kexts go to /L/E, not /S/L/E).

If you want to use the FakeSMC sensor kexts, install them with

_tools/install_sensors.sh

 

[thanman]

Use 1000baseT connection instead. Or you could try setting manual settings to 100baseT.

I meant to say my internet speed is 100Mb/s. I am connected in my local lan at gigabit speed.

 

[thanman]

It depends on BIOS settings I had the same thing yesterday

Can you share what settings you changed in BIOS to fix it?

 

[poncho]

Does anyone else have ethernet drop out / speed issues using the built in NIC?

No issues so far.