[Success] b1's "Mac Mini Killer" with macOS Mojave: i7-8700 | Gigabyte Z370N | RX560 | 16GB RAM

[b166ar]

@partimers, if everything works now, I propose to finalise the build and make everything similar to mine. In the future, it will be easier to support.

Now all your kexts stored in Clover/kext/Other. I moved them to Other folder for you and edited config.plist to simplify the first installation.

Now you need:
1. Delete all kexts form Clover/kext/Other folder except FakeSMC.kext;
2. Download Kexts for LE folder from my GitHub (all kexts are up to date) ;
3. Move all this kexts to /L/E/ with this commands.
4. Set config.plist ▸ System Parameters ▸ Inject Kexts ▸ Detect.

Reboot, and run the script, and I will make sure that everything is ok.

 

[Rajkhand]

My z370n/8700 combo works fine with iGPU and basic framebuffer tweeks in Clover.

One more question about usb, you have patched it where all the back panel usbs are working but for my placement of cooler master case I have attached the front side 2usb 3 and one usb 2 to the motherboard usb headers what would be the connector type of this? As per rehabman’s guide I understand that connector type for the backside ports it’s 3 for internal Bluetooth is 255 but what about the on-board headers?

 

[b166ar]

One more question about usb, you have patched it where all the back panel usbs are working but for my placement of cooler master case I have attached the front side 2usb 3 and one usb 2 to the motherboard usb headers what would be the connector type of this? As per rehabman’s guide I understand that connector type for the backside ports it’s 3 for internal Bluetooth is 255 but what about the on-board headers?

Backside ports — 3, that's right.
Onboard headers = internal hub. Should be 255.

 

[Rajkhand]

Backside ports is 3, that's right.
Onboard headers = internal hub. Should be 255.

Thanks will try that

 

[b166ar]

Thanks will try that

Ask questions in that SSDT thread, hope @RehabMan will help you.

 

[tungnd]

Hello @b166ar !
I using your EFI folder with iGPU only. But this do not boot to install mojave.When booting into hackintosh usb I have circle with line through. Can you help me?
Im try change with iGPU only in config.plist:

• Set BIOS → Peripherals → Initial Display Output = iGFX;
• Change SMBIOS from iMac 18.3 to 18.1 (this iMac don't have eGPU too);
• Set config.plist → Graphics → ig-platform-id = 0x59120000.
  
  
  My computer using

• Gigabyte H270-Gaming 3
• Intell core I5 7400
• Kingtom 16Gb 2133
• Samsung evo 840 240Gb

 

[b166ar]

Hello @b166ar !
I using your EFI folder with iGPU only. But this do not boot to install mojave.When booting into hackintosh usb I have circle with line through. Can you help me?
Im try change with iGPU only in config.plist:

• Set BIOS → Peripherals → Initial Display Output = iGFX;
• Change SMBIOS from iMac 18.3 to 18.1 (this iMac don't have eGPU too);
• Set config.plist → Graphics → ig-platform-id = 0x59120000.
  
  
  My computer using

• Gigabyte H270-Gaming 3
• Intell core I5 7400
• Kingtom 16Gb 2133
• Samsung evo 840 240Gb

Hi! Attach EFI folder from your boot USB drive. I will check.

 

[limaecho]

Hi

So the Hack with RX580 seems to be exhibiting some slowness when it comes to using Sketch etc. I checked using iStat and it seems the GPU is always at 100% usage.

I hope you can help me fix this! I have attached EssentialList logs here.

 

[b166ar]

Hi

So the Hack with RX580 seems to be exhibiting some slowness when it comes to using Sketch etc. I checked using iStat and it seems the GPU is always at 100% usage.

I hope you can help me fix this! I have attached EssentialList logs here.

Hi. Will check it later today.

 

[b166ar]

Hi

So the Hack with RX580 seems to be exhibiting some slowness when it comes to using Sketch etc. I checked using iStat and it seems the GPU is always at 100% usage.

I hope you can help me fix this! I have attached EssentialList logs here.

Everything looks good.

What is your BIOS settings? Did you enable RX as a primary GPU? Did you enable iGPU?