RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,015
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
tried both, the same result
Try with attached Lilu.kext. Reply with PR files.
tried both, the same result
I have a fresh Mojave install on NUC7i7BNH and everything works. This is using today's github commit.
Dual monitors (usb-c and hdmi) work. Analog and hdmi audio work.
The only minor inconvenience is one of the displays has to be disconnected during start. Otherwise I have no signal on the display at all. But once it's up, I can plug in the other display without any problems.
I just got a NUC7i5DNH (dawson canyon) and a dw1560 wireless card. I'll do another install and report back. Hoping to have wifi and bluetooth on that.
Thanks @RehabMan. Great work
nothing changed
hello ,rehabman . i find you from a chinese forum about hackintosh. I bought Intel NUC7i7DNHE.It is on the way . I will follow you guide to install 10.14 . i know that this nuc does not have inner audio hardware , can it work with hdmi2.0 to output the audio signal?
I did a fresh install of Mojave on NUC7i5DN with a DW1560 BCM94352Z M.2. Had a couple problems that I'd need help with.
- I used config_install_nuc7.plist on the Mojave USB. Install worked fine.
- Booted to install usb and chose newmac on clover:
- reset the computer, booted to newmac but booting didn't finish
- 2 HDMI monitors worked, no hdmi audio.
- installed clover on newmac
- cloned the rehabman nuc git repo, ran ./downloads.sh; ./install_downloads.sh
- right after ./install_downloads.sh finished, the wireless icon appeared on the menu bar but newmac froze.
- reset the computer, booted to install usb and got the logon screen.
- rebooted to newmac. booted only finished when there was no connection to non uhd protected hdmi
- 2 HDMI monitors worked with hdmi audio.
- wireless icon now says no wifi hardware installed
- bluetooth worked, but not wifi
- reran ./downloads.sh, ./install_downloads.sh
- make; make install_nuc7dc; cp config_nuc7_dc.plist /Volumes/EFI/EFI/CLOVER/config.plist
I'm attaching the zipped debug file. Any help is appreciated. Thanks.
- only one monitor worked (uhh protected hdmi)
- monitor couldn't detect signal coming from the regular hdmi port
- hdmi audio worked
- wireless icon still says no wifi hardware installed
- bluetooth worked, but not wifi
2018-10-26 11:51:24.117416-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117414: sprom_read_pci: buf[0] = 0xffff, returning bad-crc
2018-10-26 11:51:24.117694-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117692: sprom_read_pci: buf[0] = 0xffff, returning bad-crc
2018-10-26 11:51:24.117702-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117701: srom rev:0
2018-10-26 11:51:24.117710-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117708: initvars_srom_pci, SROM CRC Error
2018-10-26 11:51:24.117715-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117713: si_doattach: srom_var_init failed: bad srom
2018-10-26 11:51:24.117791-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117790: wlcStart failed
2018-10-26 11:51:24.117795-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117794: AirPort_Brcm43XX::start: failed
2018-10-26 11:51:24.117809-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117807: Memory leak of bytes 116
2018-10-26 11:51:24.117816-0500 0x165 Default 0x0 0 0 kernel: (AirPortBrcm4360) ARPT: 2.117814: AirPort_Brcm43XX::start: Failed 'startGated()'
I have both. I've added the NUC7i5DN to my profile.Your profile shows NUC7i7BNH, but you write about NUC7i5DN.
Which is correct?
Please fix your profile if it is inaccurate or incomplete.
Setting framebuffer-patch-enable to 0 fixed the problem. Thanks.As for the HDMI problems, try setting or disabling the framebuffer-patch-enable property in your config.plist.
Reply with PR files.
No. I should've. I tried it and wifi also didn't work on windows . I'll return the card and get a replacement. Do you recommend the Lenovo BCM94352Z instead of Dell one?Did you test your WiFi hardware in Windows to be certain it is working?