- Joined
- Mar 2, 2014
- Messages
- 2,057
- Motherboard
- Gigabyte Z390 I AORUS PRO WIFI
- CPU
- i9-9900K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
After applying the port limit patch in config.plist/Kernel and kext patches, IORegistryExplorer displays the full listing for my Z370N-WIFI motherboard as seen in the attached document. But... look closely at the "locationID" for each of the HSxx ports, and then look at the "locationID" for each of the SSxx ports. HS01 through HS14 ports clearly fall in the "XHC@14000000" category, but SS01 through SS10 ports fall in another category, which looks like maybe an "XHC@15" category. Their "locationID" is always shown as "0x15......". But there is no "XHC@15" in IORegistryExplorer, at least not in v 2.1.
If I use RehabMan's "SSDT-UIAC-ALL.dsl" file (section for motherboard "8086_a36d") to create an SSDT for my Z370N-WIFI, compiling SSDT.dsl as machine binary and then decompiling the SSDT.aml back to SSDT.dsl results in the one attached. And IORegistry Explorer responds to this SSDT by showing only HSxx ports.
Can anyone explain or help with this? Have I done something wrong? It certainly doesn't work.
[Edit 1: I have attached "iMac-2.ioreg" which shows the XHC restricted to 15 ports after disabling the port limit patch, but it only shows HS ports (and the USR1 port) and no SSxx ports.]
If I use RehabMan's "SSDT-UIAC-ALL.dsl" file (section for motherboard "8086_a36d") to create an SSDT for my Z370N-WIFI, compiling SSDT.dsl as machine binary and then decompiling the SSDT.aml back to SSDT.dsl results in the one attached. And IORegistry Explorer responds to this SSDT by showing only HSxx ports.
Can anyone explain or help with this? Have I done something wrong? It certainly doesn't work.
[Edit 1: I have attached "iMac-2.ioreg" which shows the XHC restricted to 15 ports after disabling the port limit patch, but it only shows HS ports (and the USR1 port) and no SSxx ports.]
Attachments
Last edited: