- Joined
- Mar 21, 2011
- Messages
- 801
- Motherboard
- GA-Z390-Aorus Pro
- CPU
- i7-9700K
- Graphics
- RX 590
I'm cleaning up my extracted dsdt in preparation for applying a couple of small patches for I2C.
there is a premature end of file error about 1/3 way thru the dsdt.
thanks in advance for the help
ken
attached.Looks like a bad edit (eg. your mistake).
Attach native files from ACPI/origin.
attached.
you will likely see 3 errors when you disassemble the dsdt. I believe I fixed the first two errors by fixing some coding errors, but the third error remained.
thanks
I'm an idiot. I had moved the DSDT/SSDT's to another folder for disassembly. here is the complete set from a fresh F4 extraction.Files are incomplete. No DSDT.aml.
sorry. I'm an idiot. I moved the dsdt and ssdt's to another folder for disassembly.
here is the complete set.
thanks
I'm an idiot. I had moved the DSDT/SSDT's to another folder for disassembly. here is the complete set from a fresh F4 extraction.
thanks. I did it all again and now no errors.No unusual errors here.
I disassembled as per guide: iasl -da -dl DSDT.aml SSDT*.aml
Then fixed the ECRW related error as mentioned in the guide.
Then fixed the errors regarding BNUM, DLPN, IDMN, and IDPC by commenting out the unnecessary External declarations for each.
Result: no errors.
thanks. I did it all again and now no errors.
thanks for your patience.
ken
ps--I also tried disassembling with refs.txt, and terminal returned a "segmentation error". I haven't seen that before.