macOS 10.13.4 Update

[bogdanw]

@Stork @MacMan The solution for bootable USB posted here #145 works and could be used in UniBeast too

 

[cmc850]

Had some issues - RX580 DP will not output video using system ID 18,3 - only hdmi works, and with my monitor that means low refresh rate. Had to change to 14,2 to get displayport output. Realtek audio and everything else seems to be working fine - had to do the USB3 fix, though

 

[stevegut78]

I have graphics problems without the ATI card, too. If you read the posts of broken systems... you’re very lucky because almost everyone has problem with UHD630.

What Clover config are you using regarding the UHD630?

Maybe I'm misunderstanding. I am not using an iGFX. Just the one in my sig. But OP said that he would not recommend anyone with Coffee Lake to upgrade. I said that I have Coffee Lake and AMD RX 570 with no issues. No iGFX enabled so whatever the issue is with UHD630, it is not applicable in my case.

So telling all Coffee Lake people to hold-off is a bit broad. I think maybe saying Coffee Lake users using UHD630 may have issues... Coffee Lake users using discreet graphics only (me) may not have issues. Did I misunderstand the issue?

 

[bombardier10]

Audio Realtec ALC 1220 not detected on Z370 motherboard when use toleda audio clover patch...
MultiBeast 10.2 audio instal dont work too. Can be used VooDooHDA 9.0d it works .

 

[enzo0508]

Hi!

High resolution don't work (2560x1600) (HD530/LG UltraWide). SwitchResX is working bad (set anyway 1920x1080).
What can I do with this?

Thanks!

 

[fontanero]

See PMheart's explanations https://www.insanelymac.com/forum/f...-sierra-10134/?do=findComment&comment=2579156

Flickering fix changing to 18,1 from 18,3 smbios

I tried to USB patch 10.13.4+ by PMHeart

I have put the patch See PMheart's

i deleted USBInjectAll.kext / L / E /

For now, i see all ports and works (coffelake - Z370n wifi)

 

[christianboyle]

Buttery smooth MAS update:

1. Update Clover via Clover Configurator
2. Replace AFPS.efi with latest version from page 1
3. Update macOS from MAS
4. If you have used webdriver.sh macOS will ignore whichever version you have installed and revert to system drivers (no acceleration). Just run webdriver.sh again and set it to whatever you had (.104 in my case, using 14,2 sysdef)

PS: <3 Vulgo for webdriver.sh, none of the other solutions to patch Nvidia drivers worked for me.

No issues with USB or missing audio. Everything still works (BT, FaceTime, iMessage, iTunes video, etc.)

 

[spescarus]

A temporary fix for flickering on Intel 630, I7 7700k and smbios 18,3:
- Uncheck Inject Intel (If Inject intel is checked the graphics appears two times in system informations )
- Change smbios to 17,1
- set ig-platform-id: 0x59120000

I recommend to make a backup of config.plist in case that the system wont start with those configurations.

 

[Superbogey]

Audio Realtec ALC 1220 not detected on Z370 motherboard when use toleda audio clover patch...
Multibeast 10.2 audio instal dont work too. Can be used VooDooHDA 9.0d it works .

See post #133 here: macOS 10.13.4 Update

 

[MangaFalzy]

I can't even get the combo updater to work. App store showed the update at first, it did the iTunes update and iWork updates, then restarted but 10.13.4 isn't installed and is not available. (Still on 10.13.3), combo updater runs for about 15 seconds, says its done, then restarts and is still on 10.13.3...