[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[RehabMan]

That applies to Sierra 10.11.6 and Haswell too?

Do you mean this?

Black screen (or glitchy screen) on wake with Kaby Lake and Skylake graphics

Looks to be an EDID issue. Requires display override with patched EDID.

Read here for solution:
https://www.tonymacx86.com/threads/solved-black-screen-after-upgrade-to-high-sierra.237050/

Yes, of course.

 

[RehabMan]

Hi Rehabman

Great it works
Thanks a lot
Still with phase 2 of installation when I continue from the hard disk not usb it goes into a macOS Sierra logo window with continue button. After I click continue a small rectangle pops up reading "to download and restore macOS your computer eligibility will be verified with apple" how can I get past this since I don't want to check with apple

Thank you

See guide for correct procedures to create an installer USB:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[Titanius]

Yes, of course.

Hello RehabMan,

I tried the override display with patched EDID with all different Displays B5 A5 95 80 (byte 20) + Check sum and nothing helps. After patch and copy to
"/System/Library/Displays/Contents/Resources/Overrides/"
i use "RepairPermissions /" in Terminal from FireWolf on macOS 10.12.6

Without patched EDID after wake from Sleep BlackScreen.
With the patched EDID after wake, system crash and restart.

Attached Files with F2 F4

 

[StumpyMac]

So I have installed Windows 10 on a GPT partitioned, all good, boots etc.
Then Installed High Sierra and Clover... everything seems to work, except after reboot I cannot see the Windows partition in Clover.. so can no longer boot Windows.

Please see attached zipped files.

Update: by adding legacy boot in clover configurator I now have the window partition displayed in Clover, however, when I try to boot Windows I get > PXE-EC1 Base-code ROM ID structure was not found

 

[stev3rk]

See guide for correct procedures to create an installer USB:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Thanks a lot Rehabman,

It was a glitch maybe. I managed installation fine
1 Before I go to post installation is it ok if I install any programs? I need plist editor
2 there's two post installation guides:
HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch
Booting the OS X installer on LAPTOPS with Clover
as I have hp probook is something that I can use from the second one?

Thank you

 

[RehabMan]

Hello RehabMan,

I tried the override display with patched EDID with all different Displays B5 A5 95 80 (byte 20) + Check sum and nothing helps. After patch and copy to
"/System/Library/Displays/Contents/Resources/Overrides/"
i use "RepairPermissions /" in Terminal from FireWolf on macOS 10.12.6

Without patched EDID after wake from Sleep BlackScreen.
With the patched EDID after wake, system crash and restart.

Attached Files with F2 F4

You should set a DisplayProductName in your display override such that you can verify the display override is being picked up.

 

[RehabMan]

So I have installed Windows 10 on a GPT partitioned, all good, boots etc.
Then Installed High Sierra and Clover... everything seems to work, except after reboot I cannot see the Windows partition in Clover.. so can no longer boot Windows.

Please see attached zipped files.

Update: by adding legacy boot in clover configurator I now have the window partition displayed in Clover, however, when I try to boot Windows I get > PXE-EC1 Base-code ROM ID structure was not found

As per guide, Windows should be installed UEFI.

 

[RehabMan]

Thanks a lot Rehabman,

It was a glitch maybe. I managed installation fine
1 Before I go to post installation is it ok if I install any programs? I need plist editor
2 there's two post installation guides:
HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch
Booting the OS X installer on LAPTOPS with Clover
as I have hp probook is something that I can use from the second one?

Thank you

Typically, you install Clover and configure it exactly like you did for USB.
This gets you Clover, proper/required drivers in drivers64UEFI, and a basic config.plist.
Then after verifying you can boot from the HDD/SSD, you go through the post-install specific to the Probook.
Obviously, if you know what you're doing, you can skip some steps and go directly to Probook specific post-install.

 

[rosevinnur]

this guide support 640 g1 with 1600x900 resolution and i5-4210m?

 

[RehabMan]

this guide support 640 g1 with 1600x900 resolution and i5-4210m?

Follow post #1 as written.