How to enable 'Kaby Lake' Intel 6xx Graphics (10.12.6+)

[RehabMan]

try this..

Renaming HECI->IMEI is a requirement. Your ioreg shows HECI, not IMEI.
(Note same for HDAS->HDEF).

 

[renski]

Renaming HECI->IMEI is a requirement. Your ioreg shows HECI, not IMEI.
(Note same for HDAS->HDEF).

thanks mate, is there a guide that has all of this in it?

 

[RehabMan]

thanks mate, is there a guide that has all of this in it?

My laptop plists have common renames already in them...
They are linked from my Clover laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[renski]

My laptop plists have common renames already in them...
They are linked from my Clover laptop guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Done, Intel graphics 630 with 1536mb memory but the graphics look really bad and the picture is choppy...

 

[RehabMan]

Done, Intel graphics 630 with 1536mb memory but the graphics look really bad and the picture is choppy...

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[renski]

Attached .. thanks

 

[RehabMan]

Attached .. thanks

Your ioreg cannot be opened with IORegistryExplorer v2.1. As per "Problem Reporting", you must use v2.1.

 

[renski]

Your ioreg cannot be opened with IORegistryExplorer v2.1. As per "Problem Reporting", you must use v2.1.

Ok have reattached debug on my previous post with ioreg 2.1.

 

[RehabMan]

Ok have reattached debug on my previous post with ioreg 2.1.

Your native device is 0x3e91... read here:
https://www.tonymacx86.com/threads/...0-native-support-with-gfxid-injection.240585/

Somewhere in that thread you'll find a kext you need (an injector kext I created for 0x3e91 and 0x3e92).
And you'll need current FakePCIID.kext + FakePCIID_Intel_HD_Graphics.kext.

 

[renski]

Your native device is 0x3e91... read here:
https://www.tonymacx86.com/threads/...0-native-support-with-gfxid-injection.240585/

Somewhere in that thread you'll find a kext you need (an injector kext I created for 0x3e91 and 0x3e92).
And you'll need current FakePCIID.kext + FakePCIID_Intel_HD_Graphics.kext.

thx.. can't seem to get the Intel kext to load, still playing around with it though

Stephens-iMac:Extensions stephen$ kextstat| grep -i fake

16 0 0xffffff7f80d28000 0x12000 0x12000 org.netkas.driver.FakeSMC (1765) 9EEC6103-EEBA-34B3-B9AF-8FE333C43E90 <11 7 5 4 3 1>

55 0 0xffffff7f81aaa000 0x8000 0x8000 org.rehabman.driver.FakePCIID (1.3.11) 28A872E7-E606-37BD-A8B3-775A56C0F582 <12 7 5 4 3 1>

Stephens-iMac:Extensions stephen$ kextstat| grep -i intel

18 0 0xffffff7f80d5b000 0x4000 0x4000 as.lvs1974.IntelGraphicsFixup (1.2.1) 2215A8E4-EC1F-3E23-9D90-EC501F4C838D <17 7 5 4 3 2 1>

60 0 0xffffff7f80f86000 0x14000 0x14000 com.insanelymac.IntelMausiEthernet (2.3.0) 8E3F92D7-AB89-3E72-8CFB-6B93236F5001 <20 12 5 4 3 1>

90 0 0xffffff7f827b6000 0x2000 0x2000 com.apple.driver.AppleIntelSlowAdaptiveClocking (4.0.0) 7DFBC6BB-39A0-3639-9683-99472E9AAC69 <89 4 3>

99 0 0xffffff7f828f6000 0x5000 0x5000 com.apple.driver.AppleIntelPCHPMC (2.0.1) 9427576F-C478-329C-94DC-6CCC70E86AA1 <86 13 12 11 4 3>

111 0 0xffffff7f8243d000 0xf3000 0xf3000 com.apple.driver.AppleIntelKBLGraphics (10.3.0) 5A96BB13-0617-3A83-B42F-BD1F5315D0DB <110 106 91 12 7 6 5 4 3 1>