HP ENVY x360 13-y013cl – Kaby Lake
Got this at costco:
https://www.costco.com/HP-ENVY-x360-13-y013cl-13t-Touchscreen-2-in-1-Laptop---Intel-Core-i7---QHD+-.product.100317294.html
Link:
http://support.hp.com/us-en/document/c05318836
Works –
OSX 10.11.6
Microprocessor - Intel® Core™ i7-7500U (2.7 GHz, up to 3.5 GHz, 4 MB cache, 2 cores)
Memory - 16 GB LPDDR3-1866 SDRAM
Video graphics - Intel® HD Graphics 620 [use FakePCIID.kext & FakePCIID_Intel_HD_Graphics.kext & HD config_HD620.plist].
Hard drive - 256 GB PCIe® NVMe™ M.2 SSD [works with class-code spoof + HackrNVMeFamily*.kext]
Display -13.3" diagonal QHD+ UWVA eDP WLED-backlit multitouch-enabled edge-to-edge glass (3200 x 1800)
Sleep – Sleeps when lid shuts and wakes up when lids open. However, can’t wake up system with keyboard/trackpad.
"Disk Not Ejected" USB error fix – Install Jettison Mac App
Trackpad/Keyboard – Install SmartTouchPad_v4.6.5
Backlight - works with DSDT edit + IntelBacklight.kext
App Store - works with NullEthernet.kext + NullEthernetInjector.kext
AppleLPC - tried DSDT edit but didn't work so ejected manually with AppleLPCInjector.kext
HiDPI – works
1. Enable HiDPI mode:
a. In terminal – sudo defaults write /System/Library/Displays/Contents/Resources/Overrides/com.apple.windowserver DisplayResolutionEnabled -bool YES
b. copy attached DisplayVendorID-4c83 folder to /System/Library/Displays/Contents/Resources/Overrides/
c. Install RDM 2.1 and enjoy!
Touchscreen - works OOB
Doesn’t work –
Sound – Conexant CX8200 (14f1:2008) [Tried using VoodooHDA; it works but but it stutters]
Battery - tried battery_HP-DV6-3165sf DSDT patch + APCIBatteryManager.kext, works but the time remaining goes up and down consistently and the backlight becomes laggy so I removed the patch.
WiFi – Intel Dual Band Wireless-AC 7265 [Bought a DW1560 (BCM94352Z) card, will replace once the card arrives)
Keyboard Backlight Controls – Temporarily fix with Karabiner but would like it working with DSDT edit.
Pre-installation
1. Boot into BIOS and do the following
a. Restore to BIOS default
b. Disable Secure Boot in BIOS
2. Create Clover UEFI USB using post #1 of the following guide -
http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html. I used the createinstallmedia method.
a. Download the attached EFI folder and copy the files into your USB’s EFI partition. Make sure to overwrite the files.
Installation
1. Boot into USB and follow post #2 of the following guide -
http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
2. Install clover to your new OSX partition on your HDD
3. Copy EFI folder from your USB to EFI partition on your HDD.
4. Reboot and Enjoy!