Contribute
Register

[Guide] Asus ROG GL502VS (Skylake, i7-6700HQ, GTX 1070) Sierra 10.12.4

Status
Not open for further replies.
RehabMan said:
There is no Broadcom WiFi device on the PCI bus. Broadcom devices are vendor 14e4. No such devices are listed by your Clover bootlog.

0:103 0:000 === [ GetDevices ] ========================================
0:103 0:000 PCI (00|00:00.00) : 8086 1910 class=060000
0:103 0:000 PCI (00|00:01.00) : 8086 1901 class=060400
0:103 0:000 PCI (00|01:00.00) : 10DE 1617 class=030000
0:103 0:000 - GFX: Model=Asus GeForce GTX 980M family 124 (Nvidia)
0:103 0:000 PCI (00|01:00.01) : 10DE 0FBB class=040300
0:103 0:000 - HDMI Audio:
0:103 0:000 PCI (00|00:04.00) : 8086 1903 class=118000
0:103 0:000 PCI (00|00:14.00) : 8086 A12F class=0C0330
0:103 0:000 PCI (00|00:14.02) : 8086 A131 class=118000
0:103 0:000 PCI (00|00:15.00) : 8086 A160 class=118000
0:103 0:000 PCI (00|00:15.01) : 8086 A161 class=118000
0:103 0:000 PCI (00|00:16.00) : 8086 A13A class=078000
0:103 0:000 PCI (00|00:17.00) : 8086 A103 class=010601
0:103 0:000 PCI (00|00:1C.00) : 8086 A113 class=060400
0:103 0:000 PCI (00|02:00.00) : 10EC 8168 class=020000
0:103 0:000 - LAN: 0 Vendor=Realtek
0:103 0:000 PCI (00|00:1C.04) : 8086 A114 class=060400
0:103 0:000 PCI (00|03:00.00) : 1B21 1242 class=0C0330
0:103 0:000 PCI (00|00:1D.00) : 8086 A118 class=060400
0:103 0:000 PCI (00|04:00.00) : 144D A802 class=010802
0:103 0:000 PCI (00|00:1F.00) : 8086 A14E class=060100
0:103 0:000 PCI (00|00:1F.02) : 8086 A121 class=058000
0:103 0:000 PCI (00|00:1F.03) : 8086 A170 class=040300
0:103 0:000 PCI (00|00:1F.04) : 8086 A123 class=0C0500

Either your card is not installed correctly or is malfunctioning.
You should have tested it on Windows...
Click to expand...
Thanks for ur comment. I got it working . But still 5GHz not showing and BT is super slow. Even my MX Master is very laggy with it
 
iamsanoj said:
Thanks for ur comment. I got it working . But still 5GHz not showing and BT is super slow. Even my MX Master is very laggy with it
Click to expand...

Please do not write duplicate posts.
My reply is in your other thread.
 
Hi everyone I'm trying install Os X in a ROG G752VT but I can't yet because my ROG doesn't boot :banghead: , the hardware is similar as the ROG on this post, so I hope you can help me please I readed other post without good results.
Thanks :wave:.
i7-6700HQ Skylake
GTX 970m i'm saw in other threats this works now.

Also sorry for my very bad English. :cry:
 
ESPEJEL said:
Hi everyone I'm trying install Os X in a ROG G752VT but I can't yet because my ROG doesn't boot :banghead: , the hardware is similar as the ROG on this post, so I hope you can help me please I readed other post without good results.
Thanks :wave:.
i7-6700HQ Skylake
GTX 970m i'm saw in other threats this works now.

Also sorry for my very bad English. :cry:
Click to expand...

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
looks like a good laptop, i found this "ASUS ROG STRIX GL502VS-DS71 7th Gen, GTX 1070 pascal, which seems to be the updated model of your model, i guess changes are i7700hq and 120ghz ips 1080p screen, it ships direct from asus and i think this is a mac book pro Killer" I have a few questions
1. Does Power Management Work well for you?
2. Does WiFi, Bluetooth, Handoff Work well?
3. Does audio fully work, i.e. headphone and mic jackpin? Headphone very important
4. How good is your track pad?
5. How good are nvidia drivers?
6. I will request you do a Geek bench 4 score please
i will great-full for your response sir
 
Lenovo ThinkPad L540 (Haswell)
Other |  i3 Other |  HD 4600
I have the similar setup that you have guys, gl502vt model but I can't make it work. my dsdt can't be saved. it shows 0 errors but when I try to save it don't let me... there is an image uploaded. please help me.
 

Attachments

  • Screen Shot 2017-08-26 at 10.33.53 PM.png
    Screen Shot 2017-08-26 at 10.33.53 PM.png
    47.7 KB · Views: 113
  • DSDT.dsl
    1.2 MB · Views: 111
Last edited:
RehabMan said:
I had no problem saving the file you attached.
Check that you're using the correct version of MaciASL with correct settings (ACPI 6.1).
See guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/
Click to expand...
Hey sir, thank so much for quick response, I still having the same problem, I have followed the guide and I have your last MaciASL from bitbucket with ACPI 6.1... I wonder if I can send you my modified .dsl and you can help my saving in .aml
Im uploading here my .dsl
Please help my. ill be very happy!!
 

Attachments

  • DSDT.dsl
    1.2 MB · Views: 113
daquintana said:
Hey sir, thank so much for quick response, I still having the same problem, I have followed the guide and I have your last MaciASL from bitbucket with ACPI 6.1... I wonder if I can send you my modified .dsl and you can help my saving in .aml
Im uploading here my .dsl
Please help my. ill be very happy!!
Click to expand...

You need to provide more information on what you're doing.
Patching ACPI is something you need to do yourself.

Maybe you're trying to save it to a location that is not read-write, or a location that has inadequate free space.
You'll figure it out if you pay attention to what you are doing.
 
Now I used other Mac, and its done now but I really don't know why the laptop can't save the file, maybe cuz I'm running Mac from external disk? (I'm doing it for testings, I'm going to instal that HD inside after get done)
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top