macOS 10.12.5 Update

[yurid]

Do you have HD530 graphics?

- no, it is Intel DSL5520 onboard graphic.

 

[RehabMan]

Hi there,
A few pages back a post listed the step they took to install the update, what caught my attention was the sip setting to 3. I'm unable to boot, immediate panic if the setting is anything but 67. What I'm I doing wrong? .... Thanks

The correct setting for CsrActiveConfig is 0x67.

 

[wstrohm]

No problem here with the 10.12.5 update and nVidia Web Driver 378.05.05.15f01. GTX 1050 Ti OC is returning 83 fps on Engine "Valley" benchmark with "High" quality, fullscreen, 2xAA on a 1280 x 1024 display. (Same as 10.12.4 with earlier nVidia driver.) All good so far.

 

[cosmos654]

Do we have the same Ghost boot entry problems (additional bogus Mac boot entries being added to bios which causes system instability) when dual booting UEFI Windows 10 and this new Kernel? (without going to a Kaby bios) on a (x)170 chip-set Gigabyte or others boards? Obviously booting one drive has no problem, but the great feature of Clover is that it can boot multiple OS's UEFI. And this problem only manifests itself from a Mac OS drive, which is where the additional entries come from, not from a Windows drive or Linux. Do the 20 series bios's need the same additions added to Clover to boot properly? Should Clover be updated to latest version before making plunge, this removes the boot additions needed for 20 series bios's?

Here's a solution I found here (I have GA-Z170X GAMING 5 mobo BIOS version F5):
http://www.insanelymac.com/forum/to...t-entries-prevent-further-problems/?p=2234836
1. In EFI clover boot partition, rename "BOOT" folder as e.g. "LAUNCHER"
2. In Windows, use "EasyUEFI" to delete duplicate boot entries and create a manual boot entry pointing it to "\EFI\LAUNCHER\BOOTX64.efi".
Works 100% here.
I red somewhere BIOS Version F20 wasn't OK but I don't know about F21.

 

[nzw220]

Update ran fine. On reboot Nvidia manager said new drivers available . Downloaded all good.

 

[John V]

Install NvidiaGraphicsFixup with Lilu in Clover/Kexts/Other. Worked for me with my GTX 760. I see you have a 560.

Many Thanks el_charlie! That was the fix. You saved my butt!

I glanced over the recommend install of "NvidiaGraphicsFixup with Lilu in Clover/Kexts/Other" thinking it was more for newer motherboards and graphic cards. Didn't think it applied to my four year old plus setup using iMac 12.2 definition

Here's the info on installing "NvidiaGraphicsFixup with Lilu in Clover/Kexts/Other"" https://www.tonymacx86.com/threads/...-imac-15-or-imac-17-system-definition.183113/

Thanks again el_charlie and tonymac86 site!

 

[bbmirza]

Anyone know how to get Intel HD 4600 to work on this new update and Realtek audio ALC887?? I just made a fresh install from UniBeast and MultiBeast. I'm quite new to this so I'm stuck on what to do. I can only load into Sierra by turning Intel Injection off. Thanks

 

[dasboot5]

Here's a solution I found here (I have GA-Z170X GAMING 5 mobo BIOS version F5):
http://www.insanelymac.com/forum/to...t-entries-prevent-further-problems/?p=2234836
1. In EFI clover boot partition, rename "BOOT" folder as e.g. "LAUNCHER"
2. In Windows, use "EasyUEFI" to delete duplicate boot entries and create a manual boot entry pointing it to "\EFI\LAUNCHER\BOOTX64.efi".
Works 100% here.
I read somewhere BIOS Version F20 wasn't OK but I don't know about F21.

COSMOS654,
Does this work with 10.12.5? (the only problem with this fix is, if Clover is updated, does this not break the fix??) I.E. newest Clover is needed for Kext signing at least for 10.12.4, at least it was, but again this has not been addressed, (the need for Clover updating), with this thread. Current version is 4069
https://www.tonymacx86.com/threads/...d-for-kext-injection-in-macos-10-12-4.218062/

 

[ChinaPeng]

In the machine on the show my normal, but after the boot is not feeling the graphics card, how is this going on? My video card is HD630, then what should I do?

 

[Thomazella]

Intel HD 5xx/6xx Graphics drivers have changed - see here for a solution.

That's open to interpretation.

Pre Update Notes:
For users of on-board graphics, see tonymacx86's Post #6 in this thread for updates as 10.12.5 breaks HD5xx and HD6xx.

Breaks HD5xx and HD6xx. I get it now.