Contribute
Register

Multibeast 9.0.1 - Install of Clover_v2.3k_r3766-Legacy.pkg failed

Status
Not open for further replies.
Joined
Jun 16, 2011
Messages
56
Motherboard
GA-Z87N-WIFI
CPU
i5-4670K
Graphics
Vega 56
Mac
  1. MacBook Pro
Classic Mac
  1. iBook
  2. iMac
  3. LC
  4. Performa
  5. Power Mac
  6. PowerBook
Mobile Phone
  1. iOS
Fresh install Mac OS 10.12.2
ga-z68ap-d3_f8
AMD Radeon HD 6670
Unibeast 701 (Sierra, Legacy, no graphics injected)
BIOS Optimized Defaults (boots Mavericks/Chimera fine)

Multibeast 901 fails install stopped, restarted box same results, this is the initial Multibeast install for a fresh system

~/Library/Logs/MultiBeast.log

01/22/17 22:25:28 - Starting MultiBeast 9.0.1-20161010
01/22/17 22:25:44 - Failed to find node with path 'Drivers > Audio > Realtek ALCxxx > Optional HD 4600 HDMI Audio'
01/22/17 22:25:45 - Failed to find node with path 'Drivers > Audio > Realtek ALCxxx > Optional HD 4600 HDMI Audio'
01/22/17 22:26:27 - Installing 'Bootloaders > Clover v2.3k r3766 Legacy Boot Mode'
01/22/17 22:26:30 - Install of 'Clover_v2.3k_r3766-Legacy.pkg' failed.
'installer: Package name is Clover v2.3k r3766 EFI bootloader
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.

Clover_Install_Log.txt
======================================================
/dev/disk0 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *8.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS USB 7.7 GB disk0s2

/dev/disk1 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.5 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Athena Archive 1.5 TB disk1s2

/dev/disk2 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *960.2 GB disk2
1: EFI 209.7 MB disk2s1
2: Apple_HFS Hackintosh Pro SSD 959.3 GB disk2s2
3: Apple_Boot Recovery HD 650.0 MB disk2s3


ERROR: can't mount ESP partition (disk2s1) !
Check that the partition is well formated in HFS or Fat32.

To format as HFS use command like:
sudo newfs_hfs -v EFI /dev/rdisk2s1

For format as Fat32 use command like:
sudo newfs_msdos -v EFI -F 32 /dev/rdisk2s1
 
ERROR: can't mount ESP partition (disk2s1) !
Check that the partition is well formated in HFS or Fat32.

To format as HFS use command like:
sudo newfs_hfs -v EFI /dev/rdisk2s1

performed #sudo newfs_hfs -v EFI /dev/rdisk2s1

Initial Install of Multibeast drivers succeeded!
 
Status
Not open for further replies.
Back
Top