Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
Ok :)

The problem i have consists to an impossibility to change Clover Theme. Like i explained in my first post i tried all the obvious possibilities (Editing manually config.plist, editing config.plist with Clover Configurator or Clover Theme Manager).

"Launch daemon & rc scripts are not operational.NVRAM changes won't be retained next boot." is an error message showing when using Clover theme manager .

Because this app should be made to simplify clover theme customization (the theme manager that was imbedded in Clover Configurator is vanished) i assume that this error message is strongly related to my problem ;-)

Googleling the error message only reports technical pages.

I try to remove EmuVariableUefi-64.efi.

Thank you for your time.

Excellent!

Removing EmuVariableUefi-64.efi fixed my issue :)

ThX Rehabman
 
A last thing, UEFI Shell 64 doesn't work anymore since my last Clover 3961 update. Any idea?
 
Dear RehabMan,

Here is the info as described in 'Unsupported laptops':
HP Zbook Studio G3:
i7-6700HQ
8 GB DDR4-SDRAM 2133 MHz
256 GB Turbo Drive PCIe SSD
Resolution 1920 x 1080 Pixels
Chipset motherboard: Intel CM236
Discrete graphics: NVIDIA Quadro M1000M 4 GB GDDR5

No plans to support laptops without Intel graphics in this guide.
 
Ok :)

The problem i have consists to an impossibility to change Clover Theme. Like i explained in my first post i tried all the obvious possibilities (Editing manually config.plist, editing config.plist with Clover Configurator or Clover Theme Manager).

"Launch daemon & rc scripts are not operational.NVRAM changes won't be retained next boot." is an error message showing when using Clover theme manager .

Because this app should be made to simplify clover theme customization (the theme manager that was imbedded in Clover Configurator is vanished) i assume that this error message is strongly related to my problem ;-)

Googleling the error message only reports technical pages.

I try to remove EmuVariableUefi-64.efi.

Thank you for your time.

Your current theme in config.plist/GUI/Theme is set to 'BGM'.
You can change it to any other theme you may have in EFI/Clover/themes.
Use a plist editor to edit your config.plist. You can use Finder to copy themes in to EFI/Clover/themes.
 
Rehabman, do you recommend to update to the latest F.62 Rev.A (8th of Nov 2016) BIOS from F.61 on a 4340s? Or better leave it as is, if working properly? (cannot downgrade in case of upgrade).
 
For nearly 3 years I have been running a Hackintosh using Clover (latest release) on an HP 450 G1 (Intel(R) Core(TM) i5-4200M, 8GB Ram 64bit, as a Mac ProBook Retina 11,1 and Board i.d. #1942) I have used Mavericks, Yosemite and currently El Capitan since early 2016. Everything worked extremely well up through release OS X 10.11.5. Problem: after upgrade to OS X 10.11.6 we began to have problems. Ran your GitHub and things got worse. Installed Security Update 2-2016, and the system would not boot. Reinstalled 10.11.5 for the app store and the system ran for about 10-days. Now I cannot boot into any Mac partition, even into recovery (Windows 7 is okay). Have used numerous boot flags. Depending on what boot flags are used, it halts at: IOAPIC: Version 0x20 Vector 64:87; missing Blue Tooth Controller Transport or Failed getting NVRAM. Can access the Clover shell, but not a terminal.

Read post #1, "Problem Reporting".
 
My bad, I should have included:
  • Intel HD Graphics 530

Had you included it, it would be inaccurate/wrong.
Your lspci output shows Nvidia only... no Intel HD graphics.
 
Rehabman, do you recommend to update to the latest F.62 Rev.A (8th of Nov 2016) BIOS from F.61 on a 4340s? Or better leave it as is, if working properly? (cannot downgrade in case of upgrade).

I haven't upgraded, so cannot share any personal experience. I expect it makes no difference.
 
Status
Not open for further replies.
Back
Top