- Joined
- Nov 5, 2011
- Messages
- 15
- Motherboard
- Gigabyte Z390 Aorus Master
- CPU
- i9-9900K
- Graphics
- Radeon VII
- Mac
- Classic Mac
- Mobile Phone
Asus Maximus VIII Formula Intel Z170 no AUDIO ?
Build:
1:Asus Maximus VIII Formula Intel Z170 (Socket 1151) DDR4 ATX Motherboard
2:Gigabyte GeForce GTX 980 G1 Gaming 4096MB GDDR5 PCI-Express Graphics Card
3:Corsair Dominator Platinum 32GB (4x8GB) DDR4 PC4-25600C16 3200MHz Dual/Quad Channel Kit (CMD32GX4M4B)
4:Intel Core i7-6700K 4.0GHz (Skylake) Socket LGA1151 Processor
5:EVGA SuperNova G2 750W '80 Plus Gold' Modular Power Supply
6:Corsair Hydro H110i GT 280mm Extreme Performance Liquid CPU Cooler (CW-9060019-WW)
7hanteks Enthoo Evolv ATX Mid Tower Case - Black
I need some help with my audio as its not working ? i have looked all over for a Asus Maximus VIII Formula Intel Z170 Tosh build and came up blank the only link i found near to this board was.
1. tonymac website (( Stork's Gene Build > ASUS MAXIMUS VIII GENE - i5-6600K - Gigabyte GTX 950 ))
which helped me lot with getting my build off the ground however i failed to get my Audio working and i need some help please , looking into what audio i have on this board via tonymac i found its (( SFX )) and on the Asus website it came up as (( ROG SupremeFX 2015 8-Channel High Definition Audio CODEC )).
I tried the MultiBeast settings from Stork's Gene Build listed below which worked a charm for all but the AUDIO.
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALC1150
(Optional) Drivers > Disk > 3rd Party SATA
(Optional) Drivers > Misc > FakeSMC Plugins
(Optional) Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Intel > IntelMausiEthernet
Drivers > 3rd Party USB 3.0 (RehabMan's GenericUSBXHCI.kext)
I then moved to my EFI folder / clover config.plist and added lines below under <key>ACPI</key>.
<key>Patches</key>
<array>
<dict>
<key>Comment</key>
<string>Rename HDAS to HDEF</string>
<key>Find</key>
<data>
SERBUw==
</data>
<key>Replace</key>
<data>
SERFRg==
</data>
</dict>
</array>
Still with no luck could someone please guide me on what audio KETEX i need for this board / which multibeast audio are what i am doing wrong please.
I intend to write a post after on how to got this board running on El Capitan after, hopefully this might help others in the future with this build.
Build:
1:Asus Maximus VIII Formula Intel Z170 (Socket 1151) DDR4 ATX Motherboard
2:Gigabyte GeForce GTX 980 G1 Gaming 4096MB GDDR5 PCI-Express Graphics Card
3:Corsair Dominator Platinum 32GB (4x8GB) DDR4 PC4-25600C16 3200MHz Dual/Quad Channel Kit (CMD32GX4M4B)
4:Intel Core i7-6700K 4.0GHz (Skylake) Socket LGA1151 Processor
5:EVGA SuperNova G2 750W '80 Plus Gold' Modular Power Supply
6:Corsair Hydro H110i GT 280mm Extreme Performance Liquid CPU Cooler (CW-9060019-WW)
7hanteks Enthoo Evolv ATX Mid Tower Case - Black
I need some help with my audio as its not working ? i have looked all over for a Asus Maximus VIII Formula Intel Z170 Tosh build and came up blank the only link i found near to this board was.
1. tonymac website (( Stork's Gene Build > ASUS MAXIMUS VIII GENE - i5-6600K - Gigabyte GTX 950 ))
which helped me lot with getting my build off the ground however i failed to get my Audio working and i need some help please , looking into what audio i have on this board via tonymac i found its (( SFX )) and on the Asus website it came up as (( ROG SupremeFX 2015 8-Channel High Definition Audio CODEC )).
I tried the MultiBeast settings from Stork's Gene Build listed below which worked a charm for all but the AUDIO.
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALC1150
(Optional) Drivers > Disk > 3rd Party SATA
(Optional) Drivers > Misc > FakeSMC Plugins
(Optional) Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Intel > IntelMausiEthernet
Drivers > 3rd Party USB 3.0 (RehabMan's GenericUSBXHCI.kext)
I then moved to my EFI folder / clover config.plist and added lines below under <key>ACPI</key>.
<key>Patches</key>
<array>
<dict>
<key>Comment</key>
<string>Rename HDAS to HDEF</string>
<key>Find</key>
<data>
SERBUw==
</data>
<key>Replace</key>
<data>
SERFRg==
</data>
</dict>
</array>
Still with no luck could someone please guide me on what audio KETEX i need for this board / which multibeast audio are what i am doing wrong please.
I intend to write a post after on how to got this board running on El Capitan after, hopefully this might help others in the future with this build.