- Joined
- Apr 13, 2015
- Messages
- 28
- Motherboard
- HP Spectre x360 13" 4K 13-AC033DX
- CPU
- i7 7500U / Kaby Lake rev. 02 BIOS: AMI F.20
- Graphics
- Intel HD 620, 3840x2160
- Mobile Phone
SPECS | Z77X-UD5H | i7-3770K | DUAL GT 640 | 16GB Memory | 250GB SSD
UniBeast 6.0 | Clover r3292 | OS X 10.11 El Cap
View attachment 157425
POST INSTALLATION
CloverALC
Finally, to get audio working. The full guide relating to this subject can be found here: http://www.tonymacx86.com/audio/143757-audio-realtek-alc-applehda-guide.html. First thing you want to do is download (Raw) audio_cloverALC-110.command.
View attachment 157971
Great guide and thank you.
I have a very similar system ga-z77n-wifi, 3770k and I'm currently using HD4000, but, plan on adding a gtx 950. Thank you so much for posting your SSDT for the 3770k processor, Hopefully, someone can post an SSDT for the simple overclocking that you can done with this and my Mobo at say 4.2 or 4.3.
For what it's worth, I have the following questions and comments:
1) Following a different but similar guide I was instructed to install osxaptiofix2drv-64 instead of osxaptiofixdrv... as anyone know or tested the difference? Not sure is this is a small difference between the your mobo and my slightly different z77n-wifi mobo. I believe that when using the clover-uefi.pkg that tonymac has created it goes with the osxaptiofix2drv-64 if I remember correctly.
2) I understand that the 3770k using hd4000 and not hd4600 graphics. However, I read on a couple different posts that I should still select yes to the toleda script question "Enable 4600 HDMI audio" and then select yes to 3. I also ran a secondary toleda script that generated an SSDT to enable HDMI audio on 1 of the 2 hdmi ports. I did have to rename this ssdt to ssdt-1.aml, so that my power management ssdt could be named ssdt.aml. Any thoughts? The reasoning is that the toleda script is detecting the the audio kext and the gpu, so the default is yes to the questions, unless there is some kind of error. In an effort to streamline the script it says 4600 for both 4600 and 4000, instead of different lines for each. I know in version b, it said 4000, but now that we are up to version j, a chance has been made somewhere along the way.
3) In order to load the SSDT isn't there a option or options in clover config that you need to enable? Unless I missed it, I don't think I saw this step in your guide. Also, just to be sure, since the 3770k has native apple power management, are you saying that the ssdt is not even necessary and you will have the same speed steps with or without the ssdt or are speed steps and power management two different things all together?
4) I know while not necessary, some people still love their dsdt's. For this mobo you decided that it was not necessary or worth it to have a dsdt? The reason I ask it I believe the lack of dsdt's are causing some people usb 3.0 issues in el cap.
Thank you again for taking the time to prepare such and informative and helpful guide. Hopefully, my questions above will help the community.
Cheers!