Guide To Install Mavericks with Clover Bootloader

[pipil]

It is one of the better choices. The only card with 802.11ac, 5Ghz, and BT.

I've ordered this card thks. Can you explain to me how to install it ( software speakly) do have I modify some files ?or others?

 

[RehabMan]

I've ordered this card thks. Can you explain to me how to install it ( software speakly) do have I modify some files ?or others?

Read post #1.

 

[hongchangwei]

View attachment 135263View attachment 135263I have a HP 9470 m according to the post installation is successful, but often appear such mistakes when powered up,Also can enter the system, the occasional mistake, don't know where is the problem
View attachment config.plist

 

[basasa]

Install Windows UEFI as dual boot
​

Install Windows UEFI (and other UEFI OSes) are quite easy because you don't need to mess up with Boot records. See FAQ for more detail.

**To Install Windows 7 UEFI on 7-series laptops, you must select UEFI hybrid (with CSM) in BIOS.

1. Create your Windows UEFI install USB key by following the guide here:
http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html

2. Use Disk Utility or GParted to create a partition with Mac OS X Extended format on hard drive for Windows. This will prevent OS X from convert your drive to GPT/Hybrid MBR.

3. Restart and press F9 to choose Boot devices > Boot from EFI file > choose your Windows Install USB key > EFI > Boot > BOOTX64.efi

4. Use Windows installer to format the partition you prepared as NTFS. Complete install and now you will boot to Windows by default, Clover disappears.

5. Restart and press F9 to choose Boot devices > Boot from EFI file > choose your EFI partition (which contains Clover bootloader) > EFI > Clover > CLOVERX64.efi

6. You can now see Clover bootloader with new entry "Boot Microsoft UEFI Menu from EFI".

7. Boot to OS X and use Clover Configurator to mount EFI partition of your Windows UEFI drive (in case you have installed Windows to second drive, select disk1s1). Go to EFI/Microsoft/Boot/ and rename bootmgfw.efi to bootmgfw-orig.efi

8. Restart.

9. If you can only boot to Windows after updating Windows, then rename new bootmgfw.efi to bootmgfw-orig again.

**Note: If you installed Windows 7 UEFI, you should install latest Service Pack before installling HD3000 update***

8-restart
then i get there is no bootable disk

 

[RehabMan]

8-restart
then i get there is no bootable disk

Make sure you have UEFI enabled in BIOS.

Power down. Press power button.

 

[basasa]

Make sure you have UEFI enabled in BIOS.

Power down. Press power button.

i did ... and i can open clover by f9 and select EFI > Clover > CLOVERX64.efi

 

[RehabMan]

i did ... and i can open clover by f9 and select EFI > Clover > CLOVERX64.efi

Check the contents of your EFI partition. You should find \EFI\BOOT\BOOTX64.efi.

Also, check BIOS version.

 

[basasa]

Check the contents of your EFI partition. You should find \EFI\BOOT\BOOTX64.efi.

Also, check BIOS version.

 

[RehabMan]

View attachment 135828

Your image clearly shows you didn't follow the guide in post #1.

 

[basasa]

Your image clearly shows you didn't follow the guide in post #1.

i did not .. i did this > Migrate from Chameleon