[SUCCESS, Writing in Progress] Acer 5749 Hardware Guide + Mavericks 100%!!

[raw99]

Definitely weird. It is not detecting the laptop display under framebuffer@0.

Just for grins try this:
IGPEnabler=Y IGPlatformID=00010000

Also, double check your EDID as the data you have there does not match previous ioreg dumps...

EDID data is correct, checked.... That's because in previous ioreg dumps I was using patch default EDID...
Will try IGPEnabler...

 

[raw99]

At any rate, I'm going to try my old method (using the hack, can't mention it's name here).
If it works, I'm just going to use those kexts in a Vanilla installation and see what happens.

Can you post in PM that hack name?

 

[raw99]

Definitely weird. It is not detecting the laptop display under framebuffer@0.

Just for grins try this:
IGPEnabler=Y IGPlatformID=00010000

Also, double check your EDID as the data you have there does not match previous ioreg dumps...

IGPEnabler=Yes - no changes, blank screen...

 

[Shining_Ace]

Can you post in PM that hack name?

I got it to fully work under that hack.
This is funny. No DSDT Edits or anything.
I'll copy the kexts over to a vanilla installation and see what happens.

I'll upload the kexts anyways so you don't need the hack
Hint: It begins with N

 

[RehabMan]

Other things to try (if you actually want to understand how your install works...)

- I've seen one 1366x768 display that was dual-link. So you could try injecting AAPL00,DualLink.
- Try setting Graphics Mode at boot, "Graphics Mode"=1366x768x32

 

[raw99]

Other things to try (if you actually want to understand how your install works...)

- I've seen one 1366x768 display that was dual-link. So you could try injecting AAPL00,DualLink.
- Try setting Graphics Mode at boot, "Graphics Mode"=1366x768x32

I got it running!
I have some white stripes on monitor but it works!

Actually I don't know how I fixed it, because I changed very much things (Added DualLink, Some Graphics DSDT patch, enabled VGA port, edited Clover config)....

I will try to find out...

Edit:
VGA Port works!
Why my taskbar is on both monitors? It should be that way or no?

Thanks RehabMan for help!

 

[Shining_Ace]

I got it running!
I have some white stripes on monitor but it works!

Actually I don't know how I fixed it, because I changed very much things (Added DualLink, Some Graphics DSDT patch, enabled VGA port, edited Clover config)....

I will try to find out...

Edit:
VGA Port works!
Why my taskbar is on both monitors? It should be that way or no?

Thanks RehabMan for help!

Taskbar in Mavericks is on all monitors.
Mine is currently working without edits, I say we both work on each side and see who gets further!
Thanks RehabMan

 

[raw99]

Taskbar in Mavericks is on all monitors.
Mine is currently working without edits, I say we both work on each side and see who gets further!
Thanks RehabMan

I still need sound, cpu power management, sleep does not works....
This is bug or feature: when I change brightness to min, monitor turns off?? When I turn "+" it is on again....

 

[RehabMan]

This is bug or feature: when I change brightness to min, monitor turns off?? When I turn "+" it is on again....

That is how Macs work.

 

[Shining_Ace]

I still need sound, cpu power management, sleep does not works....
This is bug or feature: when I change brightness to min, monitor turns off?? When I turn "+" it is on again....

Sound: VoodooHDA 2.8.4
CPU Power Management: Multibeast: Patched AppleIntelCPUPowerManagement
And SSDT for you CPU, you can find it on google or even on these forums.
Sleep will work after installing patched AICPUPM