- Joined
- Aug 31, 2010
- Messages
- 3,888
- Motherboard
- Asrock Z87E-ITX
- CPU
- i7-4770S
- Graphics
- GTX 760
- Mac
- Mobile Phone
Hi all,
I'm doing some testing here for an updated build.
I got myself a Sandisk Extreme 240Gb SSD drive which has the latest firmware update.
Ive installed Snow Leopard, applied all the relevant patches and updates.
When I use '-v' as a boot option and look through the contents scrolling away, I noticed one line which reads:
'bind(): Cant allocate requested address'
Doing the exact same installation on a mechanical hard drive doesnt show this.
Anybody know what this is referring to or how I can get rid of it ?
When I first saw it, I went straight to the networking section, but everything is in order there.
I also have trim enabler installed and activated.
Any ideas folks ??
I'm doing some testing here for an updated build.
I got myself a Sandisk Extreme 240Gb SSD drive which has the latest firmware update.
Ive installed Snow Leopard, applied all the relevant patches and updates.
When I use '-v' as a boot option and look through the contents scrolling away, I noticed one line which reads:
'bind(): Cant allocate requested address'
Doing the exact same installation on a mechanical hard drive doesnt show this.
Anybody know what this is referring to or how I can get rid of it ?
When I first saw it, I went straight to the networking section, but everything is in order there.
I also have trim enabler installed and activated.
Any ideas folks ??