- Joined
- Nov 2, 2014
- Messages
- 42
- Motherboard
- Asus Vivobook X550CA-CJ532H -Clover
- CPU
- i7 3537U / HM76
- Graphics
- HD 4000, 1366x768
- Mac
- Mobile Phone
Hello!
First of all, i would like to introduce myself, I'm from Spain (sorry for my english), this is my first hackintosh, I followed this tuto: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html
I have installed osx yosemite without problems, but now, i don't know what should I do after installation, If you read this: http://www.tonymacx86.com/hp-proboo...-install-yosemite-hp-laptops-clover-uefi.html
I'm at this point:
10. Restart and press F9 to choose Boot devices > Boot from EFI file > choose your Clover bootloader partition > EFI > Boot > BOOTX64.efi
11. Clover bootloader screen shows up, press F4, select "Boot OS X from YourPartition".
12. If everything goes well, you can boot straight to Yosemite desktop.
So, now, i don't know how to continue, here are my questions:
How can i boot from hdd without the usb that i used for the installation? I need to open clover and follow the same steps that i followed the first time but selecting hdd (where i have installed osx) instead of the usb?
How can I install the drivers i need? For wifi, for brightness, for audio, battery monitor, etc. I need to download it from some site or i have to use a special software?
I'm sorry, i'm very noob, i hope that anyone could help me.
Regards.
My specs:
Asus Vivobook X550CA-CJ532HCPU
Intel Core i7 3537UGraphicsIntel hd 4000Other HardwareChipset : Intel® HM76 Express Chipset
RAM : 4GB DDR3 1600 MHz SDRAM
Wifi : Atheros AR9485 Wireless Network Adapter
First of all, i would like to introduce myself, I'm from Spain (sorry for my english), this is my first hackintosh, I followed this tuto: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html
I have installed osx yosemite without problems, but now, i don't know what should I do after installation, If you read this: http://www.tonymacx86.com/hp-proboo...-install-yosemite-hp-laptops-clover-uefi.html
I'm at this point:
10. Restart and press F9 to choose Boot devices > Boot from EFI file > choose your Clover bootloader partition > EFI > Boot > BOOTX64.efi
11. Clover bootloader screen shows up, press F4, select "Boot OS X from YourPartition".
12. If everything goes well, you can boot straight to Yosemite desktop.
So, now, i don't know how to continue, here are my questions:
How can i boot from hdd without the usb that i used for the installation? I need to open clover and follow the same steps that i followed the first time but selecting hdd (where i have installed osx) instead of the usb?
How can I install the drivers i need? For wifi, for brightness, for audio, battery monitor, etc. I need to download it from some site or i have to use a special software?
I'm sorry, i'm very noob, i hope that anyone could help me.
Regards.
My specs:
Asus Vivobook X550CA-CJ532HCPU
Intel Core i7 3537UGraphicsIntel hd 4000Other HardwareChipset : Intel® HM76 Express Chipset
RAM : 4GB DDR3 1600 MHz SDRAM
Wifi : Atheros AR9485 Wireless Network Adapter