<< Solved >> [HELP] macOS 10.15.7 with Unibeast can't install

[jiny505]

I followed the Installation Guide, make the Unibeast USB, set up bios, and now this screen.
I just saw apple logo and progress and then no mark.

Follow screens are -v mode and captured.

Mac OS 10.15.7.03
unibeast 10.3.0-2

- disable vt-d
- enable xhci-handoff
- disable serial port
- win8-10 feature to other os

Any helps?

 

[UtterDisbelief]

I followed the Installation Guide, make the Unibeast USB, set up bios, and now this screen.
I just saw apple logo and progress and then no mark.

Follow screens are -v mode and captured.

Mac OS 10.15.7.03
unibeast 10.3.0-2

- disable vt-d
- enable xhci-handoff
- disable serial port
- win8-10 feature to other os

Any helps?

Hi there.

Search for "Still waiting for root device".

Usually this problem occurs when the USB port you are using becomes inactive during boot. It will come live again once the OS is loaded. So to get around this move the UniBeast stick to one of the USB 2 ports above the PS/2 port to the left of your motherboard back panel.

 

[jiny505]

Thanks for your reply. But same problem.

 

[jiny505]

I will change the USB memory and coming soon

 

[jiny505]

Yes, it works. Thanks for your help.
I change to other port and it works.
You save my life. thanks

 

[jiny505]

@UtterDisbelief,

Hi, there.
I am trying to set correct Graphics Settings for hours, but I can't.
Can you help me this thread, please?

<< Solved >> - [HELP] Z390 + UHD630 Graphics not work

Hi, Guys. Thanks for your Installation Guide and I installed Mac OS 10.15.7 with Unibeast 10.3.0. But I can't complete Multibeast steps. After setting Multibeast, the screen doesn't show. (No signal) So, I copy EFI folder from Unibeast memory to Volume/EFI. And now I can run with Mac OS, but no...

www.tonymacx86.com