It is a 13700K, but my BIOS (f28) has no aperture size parameter anywhere. That link is for the Aero G though, I have an Aero D.Is your CPU a K SKU? If so, check that Aperture size is set to 1024mb.Gigabyte Z690 Aero G + i5-12600K + AMD RX 6800 XT
Anyone have sleep/wake working more than once in the same session on the DDR4 version with 13th Gen CPU? Please share EFI without your serial info and BIOS version used. I have tested beyond F8 starting at F20 with a 13700K and it is not working, thanks.www.tonymacx86.com
You are technically off topic.....It is a 13700K, but my BIOS (f28) has no aperture size parameter anywhere. That link is for the Aero G though, I have an Aero D.
Please read your manual. It seems it does.
We still need a flashed TB card?To anyone with:
@Elias64Fr has done it again! Thunderbolt Bus can be activated in Ventura and Sonoma, allowing hot plug and eGPU capability!
- Gigabyte GC-Maple Ridge
- Asus ThunderboltEX 4
- ASRock Thunderbolt 4
For all the still-unfolding details and developments, we invite you to visit this thread:
Thunderbolt 4 modified firmware with Full Thunderbolt Local Node
I have bought an Asrock Thunderbolt 4 AIC (Rev 1) with the following specification here : After patching firmware as usual (3 bytes similar to Thunderbolt 3 Titan Ridge)... et voila: This AIC board have a TBTForcePower jumper, no external wire jumper needed. Without a TBTHeader cable and...www.tonymacx86.com
On Asus motherboards it seems we do not need to flash the firmware. On Gigabyte motherboards we’re still assessing the situation, but I don’t think it’s looking hopeful.We still need a flashed TB card?
My card is not flashed. I'm not sure which SSDT to try at this moment.On Asus motherboards it seems we do not need to flash the firmware. On Gigabyte motherboards we’re still assessing the situation, but I don’t think it’s looking hopeful.
Do you have an un-flashed GC-Maple Ridge installed in Gigabyte Z690 Aero G? If so, have you tried the SSDT-only approach?
Please see this post for the SSDT. We will of course need to enable SSDT-DTPG.aml as well.My card is not flashed. I'm not sure which SSDT to try at this moment.
I tried the 2 kernel patches (Sonoma and Common) as well but didn't help.
I can help, let me know.
Sorry, which post again?Please see this post for the SSDT. We will of course need to enable SSDT-DTPG.aml as well.