- Joined
- Mar 30, 2011
- Messages
- 7
- Motherboard
- X79-UD3
- CPU
- i7 3820
- Graphics
- GTX 780ti x2 SLI
- Mobile Phone
Finally I got my System up and running 10.8.2 I post a symple guide that maybe someone finds it useful.
My System:
Gigabyte X79 UD3
Corei7 3820
16Gb Ram
HD6870 Sapphire Radeon 1Gb
1- Create a unibeast installation media (Note: if you have an HD6870 graphics card, remove the kext Ati6000Controller.kext from System/Library/Extensions in order to reach the installation screen).
2- Boot using this flags: -v PCIRootUID=1 npci=0x3000
3- Installa Mountain Lion
4- Boot into your new ML system with this: -v PCIRootUID=1 npci=0x3000
POST INSTALLATION
1- Run Multibeast whith this options:
EasyBeast Installation
Drivers/Network/Intel - hnak´s AppleIntelE1000e v2.1.7 (fix for the AppStore)
Boot Options:
PCI Configuration Fix
2- Reboot
3- Next. Unzip the file attached to this thread and copy all the files to your desktop.
4- Move DSDT file from desktop to "Main Hard Drive"/Extra
5- Run KextBeast for installing the drivers. Note: Ati6000controler.kext only for AMD6000 graphics cards.
6- Reboot
Now you may have a full Hackintosh computer.
What is working:
Audio
Ethernet
HD6870 Recognized as is (Fix for Adobe After Effects, if not recognized try changing in your org.chameleon.Boot.plist GraphicsEnbler to yes or no and PCIRootUID to 1 or 0. My system´s configuration is: GraphisEnabler=Yes | PCIRootUID=0)
HotSwap in Marvell ports only
USB3: didn´t try it. Appears as High Speed USB3 ports and also as SuperSpeed USB3
What is not working:
OLD: Sleep etc as X79 motherboards are not supported yet.
NOTE!!: Thanks to morganb now I can confirm that sleep works if you install SleepEnabler.kext through KextBeast. Thank you Morganb!
My System:
Gigabyte X79 UD3
Corei7 3820
16Gb Ram
HD6870 Sapphire Radeon 1Gb
1- Create a unibeast installation media (Note: if you have an HD6870 graphics card, remove the kext Ati6000Controller.kext from System/Library/Extensions in order to reach the installation screen).
2- Boot using this flags: -v PCIRootUID=1 npci=0x3000
3- Installa Mountain Lion
4- Boot into your new ML system with this: -v PCIRootUID=1 npci=0x3000
POST INSTALLATION
1- Run Multibeast whith this options:
EasyBeast Installation
Drivers/Network/Intel - hnak´s AppleIntelE1000e v2.1.7 (fix for the AppStore)
Boot Options:
PCI Configuration Fix
2- Reboot
3- Next. Unzip the file attached to this thread and copy all the files to your desktop.
4- Move DSDT file from desktop to "Main Hard Drive"/Extra
5- Run KextBeast for installing the drivers. Note: Ati6000controler.kext only for AMD6000 graphics cards.
6- Reboot
Now you may have a full Hackintosh computer.
What is working:
Audio
Ethernet
HD6870 Recognized as is (Fix for Adobe After Effects, if not recognized try changing in your org.chameleon.Boot.plist GraphicsEnbler to yes or no and PCIRootUID to 1 or 0. My system´s configuration is: GraphisEnabler=Yes | PCIRootUID=0)
HotSwap in Marvell ports only
USB3: didn´t try it. Appears as High Speed USB3 ports and also as SuperSpeed USB3
What is not working:
OLD: Sleep etc as X79 motherboards are not supported yet.
NOTE!!: Thanks to morganb now I can confirm that sleep works if you install SleepEnabler.kext through KextBeast. Thank you Morganb!