Native dsdt, step2 should include:
- AMI-Clean_Compile-8series
- AMI-add_dsdt/PCI0/P0P2 (w/ssdt/PEG0)
- AMI-HD4600-AMD-Nvidia-A1
Reply with all files noted in Post #1, Problem Reporting.
Thanks for reply!
I remake another DSDT file, but still with no luck.
If I unplug HDMI cable and re-plug it, the PC still get reboot.
Here is my spec:
CPU: Intel Core i5 4460 /w Intel Graphic HD4600
MB: ASUS B85M-G
Apple HDA version: ALC887 (current version) from MultiBeast 7.2.0
OS X version: Yosemite 10.10.2
The attachment zip file included OS X log, DSDT, config.plist, and IOReg.
I don't know why I can't find any log file about CLOVER, even I set Debug=YES.
BTW, I don't use SSDT.
EDIT: Maybe I found the reason:
1. HD4600 easily gets problem if SMBIOS is iMac, when I turn to Mac mini, it works fine.
2. Based on 1st point, if I remove DSDT, and set Graphic/Inject=YES, HDMI works fine, even unplug cable.
3. When I put DSDT back to CLOVER, the graphic shows Iris Pro; but it only shows HD4600 without DSDT.
EDIT2: Finally, I found out the reason.
I edit my KextsToPatch according from config-hdmi_hd4600-100.plist
And add patch only:
10.10-Azul-Port_0x5-DP2HDMI
10.10-Azul-Port_0x6-DP2HDMI
10.10-Azul-Port_0x7-DP2HDMI
If I remove these patches, HDMI audio lost, but will not reboot if I unplug and re-plug HDMI cable.