- Joined
- May 4, 2014
- Messages
- 30
- Motherboard
- Intel Desktop Board DZ87KLT-75K
- CPU
- Intel Core i7 4770K
- Graphics
- NVIDIA GeForce GT 640 2048 MB
- Mac
- Classic Mac
- Mobile Phone
I can't boot into my Unibeast 5.0.0 created yosemite installer for performing clean install.
I am currently running 10.9.2 on my hackintosh with below specs:
Intel DZ87KLT-75K, ATX, Intel Z87 Express Motherboard
Intel i7-4770K
nvidia geforce GT 640 OC
OS X 10.9.2 runs without any issues for past 3 months.
Now I created bootable USB-stick for installing Yosemite.
1. download yosemite from app store
2. formatted my 8GB Kingston using GUID Partition Table and Mac OS Extended (Journaled)
3. ran Unibeast installer with default options (no laptop or legacy options)
4. after 20mins or so, Unibeast said the installer USB was successfully created
5. I reboot pressing F-10 and selecting Kingston USB
6. I can see my different drives (including Yosemite installer USB) in chameleon
I tried running first without bootflags and then with the following (producing same result):
-x
-v
-x -v
last messages from verbose output were:
....
Starting Darwin x86_64
Boot Args: kext-dev-mode=1 -x -v
then it simply reboots. can someone give me some ideas on what to try out next? Maybe some hardware / BIOS settings or different boot flags? Do you need any more information on my hardware setup? Let me know!
I am eternally grateful for any suggestions and really excited to get this going
thanks in advance!
EDIT: Added my graphics card
I am currently running 10.9.2 on my hackintosh with below specs:
Intel DZ87KLT-75K, ATX, Intel Z87 Express Motherboard
Intel i7-4770K
nvidia geforce GT 640 OC
OS X 10.9.2 runs without any issues for past 3 months.
Now I created bootable USB-stick for installing Yosemite.
1. download yosemite from app store
2. formatted my 8GB Kingston using GUID Partition Table and Mac OS Extended (Journaled)
3. ran Unibeast installer with default options (no laptop or legacy options)
4. after 20mins or so, Unibeast said the installer USB was successfully created
5. I reboot pressing F-10 and selecting Kingston USB
6. I can see my different drives (including Yosemite installer USB) in chameleon
I tried running first without bootflags and then with the following (producing same result):
-x
-v
-x -v
last messages from verbose output were:
....
Starting Darwin x86_64
Boot Args: kext-dev-mode=1 -x -v
then it simply reboots. can someone give me some ideas on what to try out next? Maybe some hardware / BIOS settings or different boot flags? Do you need any more information on my hardware setup? Let me know!
I am eternally grateful for any suggestions and really excited to get this going
thanks in advance!
EDIT: Added my graphics card