Titan Ridge 2 USB2.0 Breaks sleep

[Nextdoorboy]

Hello guys,
I have X570 Aorus Master and Titan Ridge 2 with stock firmware and TB header connected to motherboard with 5 pin jumper cable, usb ports are fully mapped, using SSDT from HackinDrom
I'm using Titan Ridge for Usb-C monitor with DisplayPort Alt Mode.
Sleep and wake works well without Usb 2, but if i plug the usb2 header to Titan Ridge, that breaks sleep and computer immediately wakes up, anyone has an idea about that stuation ?

 

[Edhawk]

I replied to this over at AMD OSX.

Your USBPorts.kext is incorrect and needs amending to take in to account the 4 x USB2 ports, 2 x USB2 headers, 2 x USB3 headers, 1 x USB Type-E (case front connector) header, 5 x USB3.2 type-A ports and 1 x USB Type-C port.

The ports you have activated don't marry up with the ports on your motherboard.

The Titan Ridge USB ports are fine.

The other Type-C ports are not.

You are totally lacking any of the 4 x USB2 ports.

You need to redo the USB port discovery and this time pay attention to which PHYSICAL port you are plugging in to. As that will dictate which connector type you need to set for each port.