- Joined
- Jul 17, 2010
- Messages
- 2
- Motherboard
- MacBook Air 13" mid 2013
- CPU
- i7 1,7Ghz
- Graphics
- Intel HD 5000
- Mac
- Classic Mac
- Mobile Phone
Hello everyone,
i'm successfully installed Mavericks 10.9.1 on my Asus P8Z77-I Deluxe System.
Specs:
Asus P8Z77-I Deluxe Mainboard
I5-3750K @ 4,2Ghz
16GB 1600Mhz Corsair DDR3
PowerColor HD7950 3GB
Samsung SSD 250GB
Everything works fine - Sleep, USB3, Audio over HDMI
Installation Guide:
1. Download the latest UniBeast and prepare you USB flash drive
2. Press F8 - Boot the with the flash drive with -v -f -x
3. Install on your Hard Drive / SSD
4. After the Installation Press F8 - boot from your USB flash drive, select your Hard Drive and type the Bootflag -s
When you see the prompt "root:", then:
5. Then you have to boot from the USB flash drive again with -v -x - follow the User Setup
6. On the Dekstop - Start MultiBeast and choose UserDSDT (see Attachment) and set the following Settings:
7. After the MultiBeast Setup - Follow the Guide http://www.tonymacx86.com/401-install-bootloader-extra-efi-partition.html
8. Reboot
9. Everythings done
The DSDT created myself with the Guide - http://www.tonymacx86.com/dsdt/107723-how-create-your-own-dsdt-using-maciasl.html
Thanks to the Community
i'm successfully installed Mavericks 10.9.1 on my Asus P8Z77-I Deluxe System.
Specs:
Asus P8Z77-I Deluxe Mainboard
I5-3750K @ 4,2Ghz
16GB 1600Mhz Corsair DDR3
PowerColor HD7950 3GB
Samsung SSD 250GB
Everything works fine - Sleep, USB3, Audio over HDMI
Installation Guide:
1. Download the latest UniBeast and prepare you USB flash drive
2. Press F8 - Boot the with the flash drive with -v -f -x
3. Install on your Hard Drive / SSD
4. After the Installation Press F8 - boot from your USB flash drive, select your Hard Drive and type the Bootflag -s
When you see the prompt "root:", then:
Code:
mount -uw /
cd /System/Library/Extensions
mkdir intel_back
mv AppleIntelHD* AppleIntelF* intel_back/
touch ../Extensions
reboot
5. Then you have to boot from the USB flash drive again with -v -x - follow the User Setup
6. On the Dekstop - Start MultiBeast and choose UserDSDT (see Attachment) and set the following Settings:
7. After the MultiBeast Setup - Follow the Guide http://www.tonymacx86.com/401-install-bootloader-extra-efi-partition.html
8. Reboot
9. Everythings done
The DSDT created myself with the Guide - http://www.tonymacx86.com/dsdt/107723-how-create-your-own-dsdt-using-maciasl.html
Thanks to the Community