- Joined
- Mar 17, 2012
- Messages
- 29
- Motherboard
- Gigabyte Z590 Vision D
- CPU
- i7-11700K
- Graphics
- Vega 56
- Mac
Hi Tsanko. Hi community,
With your EFI 075 build, the Intel i225-v does not work.
They are listed in the system preferences, and there are 2 active system configurations within the system network settings. But, whatever settings i use (manual, dhcp, dhcp with manual adress) as well as the specific handshake settings for the speed of the line (1Gbs), it does not connect to the network.
I have deleted your kexts about the RAID controller and the USB 3.0 PCIe addon-card from config.plist as well as changed your USB-port mapping to delete the USB 3.0 PCI-express card.
I added the AappleALC.kext and changed in SMBIOS your radeon 580 to my vega56 (HDMI audio and the normal graphics listed). No audio so far from the integrated audio, only DispayPort audio is working (monitor is connected by DispayPort).
A problem: with this fresh installed Monterey without network connection, nothing does works; e.g. ProperTree.
After some minutes of update, I now get a kernel panic from com.apple.kec.pthread
"fault cr2" with instant reboot. This was not present the first 5 to 10 reboots?
How can I get ProperTree to run without internet connection?
With your EFI 075 build, the Intel i225-v does not work.
They are listed in the system preferences, and there are 2 active system configurations within the system network settings. But, whatever settings i use (manual, dhcp, dhcp with manual adress) as well as the specific handshake settings for the speed of the line (1Gbs), it does not connect to the network.
I have deleted your kexts about the RAID controller and the USB 3.0 PCIe addon-card from config.plist as well as changed your USB-port mapping to delete the USB 3.0 PCI-express card.
I added the AappleALC.kext and changed in SMBIOS your radeon 580 to my vega56 (HDMI audio and the normal graphics listed). No audio so far from the integrated audio, only DispayPort audio is working (monitor is connected by DispayPort).
A problem: with this fresh installed Monterey without network connection, nothing does works; e.g. ProperTree.
After some minutes of update, I now get a kernel panic from com.apple.kec.pthread
"fault cr2" with instant reboot. This was not present the first 5 to 10 reboots?
How can I get ProperTree to run without internet connection?
Attachments
Last edited: