Success 100% on ASUS Z97-K + GTX 750 + i3 4170 + 8GB RAM on EL CAPITAN

[mikhailkp]

1. Download El Capitan from the Mac App Store and run UniBeast on a different mac (waited for about hour on UniBeast) - MacBook Air - 8gb stick
   (you have to have stable internet connection, El Capitan won't work once the download has been paused or disconnected to internet even a couple of seconds, tried downloading like 5 times *6gb* just to make this work )
   
   
   
2. UEFI BIOS > Graphics don't select anything > wait for about an hour (watch anime or stuff)
3. Download latest Bios 2701 - Important (SYNC CLOCK) - SECURE BOOT - OTHER OS >CFG Lock - Disable
4. Remove Video Card (important) otherwise it wont boot to clover :
5. Install El Capitan (Format your hard drive - fresh install is a MUST!
   
   
6. Now you're almost done, Download MultiBeast - and Nvidia Web Driver
   WebDriver-346.03.04f02 - > http://www.nvidia.com/download/driverResults.aspx/96651/en-us
   
   
7. In MultiBeast select
   Quick Start > UEFI Boot Mode,
   Drivers > Audio > Realtek ALCxxx > ALC 887/888b
   Drivers > Network > Realtek > RTL881v2.0.0​
   
   you should now have a LAN connection and audio
   
   
8. after installation, install the NVIDIA Web Driver - Important Don't reboot yet after installing MultiBeast, wait for nvidia web driver to install.
9. this is the most important part, reboot and then shut down your PC as well as the UPS/AVR, attach the GTX 750 in your cpu then boot.
   At the Clover boot screen > OPTIONS (gear thing beside clover and shutdown)> Boot Args (press enter) type this command (beside dart=0) nvda_drv=1
   
   
   
10. IT SHOULD BOOT NOW - STABLE
    
    
    
11. Download = Clover Configurator - Link >
    
    http://www.tonymacx86.com/downloads.php?do=file&id=276
    
    
    
12. open Clover Configurator mount EFI at the bottom part
    close Clover Configurator
    open finder
    you should see a EFI disk there
    open it > EFI > CLOVER > double click on config.plist
    the Clover Configurator will now open
    click on Boot (under ACPI)
    check on nvda_drv=1
    save
    close Clover Configurator
    
    
13. REBOOT
    
    install your wireless lan usb
14. - USB 3 FIX - http://www.tonymacx86.com/general-h...sb-fixes-os-x-10-11-el-capitan-reference.html

 

[tmtcsonic]

thx

i followed this step success too!!

mb:asus z97-k
cpu:i7 4790k
ram:kingstone ddr3l 1600 8g*2
hd:toshiba sata3 1gb 2.5

 

[tmtcsonic]

how about the usb problem?
i find my z97-k did not completely work especially usb 3.0

 

[lazarus]

how about the usb problem?
i find my z97-k did not completely work especially usb 3.0

Likewise. Have tried the usual fixes, and nothing seems to get my USB3 working, my attempts to do so just seem to get my internal USB2 headers unrecognized.

 

[lazarus]

Got my USB all sorted out, both 2 and 3 working properly.

See my post in this thread:

 

[mikhailkp]

Thanks man! I was about to post about the usb 3 config. will edit my post then include the usb3 fix.

 

[Stepanishev]

From Russia with Love!

 

[alkeshkumbhat]

Please help i am not being able to install mac osx in my comp.My setup is asus z97k motherboard,8 gb corsair ddr3 ram,intel i7 4970k cpu.I did all the above steps but still i am not being able install os x.The system is booting in clover 3423.An apple logo is coming when i select the usb drive for booting.After a while some errors are coming and then nothing happens.Please help.