[HELP] stuck at IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

[ruben]

hey !
i have a problem when i boot macOS Mojave from the ssd after that i had install it with usb and Clover, following this tutorial:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

(just after the PHASE 2)

the problem is that it's stuck at "IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0"
i have attached my Clover file with the config.plist, kexts, drivers..

 

[ruben]

Please help ! I don’t know what to do :/

 

[P1LGRIM]

Not a Desktop - Moved to Laptop Support.

 

[Feartech]

Please help ! I don’t know what to do :/

use a config.plist from the laptop guide untouched

make sure your kexts are latest

also remove those useless FakeSMC sensor kexts (keep FakeSMC.kext)

and AppleALC shouldn't be in there as that is not an essential kext

GenericUSBXHCI.kext shouldn't be needed for your hardware, remove that

remove OsxAptioFixDrv-64 as you already have AptioMemoryFix-64

 

[ruben]

use a config.plist from the laptop guide untouched

make sure your kexts are latest

also remove those useless FakeSMC sensor kexts (keep FakeSMC.kext)

and AppleALC shouldn't be in there as that is not an essential kext

GenericUSBXHCI.kext shouldn't be needed for your hardware, remove that

remove OsxAptioFixDrv-64 as you already have AptioMemoryFix-64

ok i did the changes i will try to boot now

 

[ruben]

use a config.plist from the laptop guide untouched

make sure your kexts are latest

also remove those useless FakeSMC sensor kexts (keep FakeSMC.kext)

and AppleALC shouldn't be in there as that is not an essential kext

GenericUSBXHCI.kext shouldn't be needed for your hardware, remove that

remove OsxAptioFixDrv-64 as you already have AptioMemoryFix-64

ok i have a new error now :
ACPI Error : Method parse/execution failed [\SB.PCI0.LPCB.EC_Q9A] ...
see attached files (i've also added the new Clover file)

 

[ruben]

i dont know why but it's booting now, can someone have a look at my EFI Folder if everythings is alright ?