[SOLVED] Z77-DS3H Multibeast?

[ElKanyeEast]

I'm a bit of a noob, and I know about multibeast, but I don't know how to customize it for my system. If you need them, my system specs are under my name or in my signature

 

[todesto]

Re: Z77-DS3H Multibeast?

just select usedDSDT without DSDT, select LAN, repair permission then reboot. You are pretty much done at that point.
Then add whatever necessary.
You will 3rd party AHCI sata to make the disk internal.

 

[Bradness]

Re: Z77-DS3H Multibeast?

These settings were ideal for me:

Should work to enable just about everything, at least function-wise. Internal drives will still show as external though. And there may be a few other quirks, but I haven't found any.

Good luck!

 

[ElKanyeEast]

Re: Z77-DS3H Multibeast?

Thanks guys I will try theses ASAP. Right now I'm running 10.7.0. Should I update to 10.7.2?

 

[nukl]

Re: Z77-DS3H Multibeast?

I have the same board and 10.7.4 runs fine on it. I use an Ivy Bridge CPU + Bridge Helper though.

 

[ElKanyeEast]

Re: Z77-DS3H Multibeast?

Ok

I did all the settings and it's still bootable, but only from unibeast.
Every time I try to boot from the hard drive, I get the boot0 error

What should I do?

 

[ElKanyeEast]

Re: Z77-DS3H Multibeast?

Ok, I fixed my own problem (again)

I ran the dd if=/Volumes/USB Name not Lion Hard Drive/usr/standalone/i386 of=/dev/disk0s2 and it fixed my problem