- Joined
- Feb 2, 2011
- Messages
- 1
- Motherboard
- Tonymac mini 2011
- CPU
- i3
- Graphics
- intel HDxxxx
- Mac
- Classic Mac
- Mobile Phone
Past 6 hours have been a struggle with this... searching multiple forums and now I'm about to break. I've finally broken down, and I'm at the mercy of Hackintosh Gods (whom reside in this forum, right?)
My Problem Summary:
Installed retail 10.6.0 with iBoot Legacy and combo'd up to 10.6.6. Before reboot I used MultiBeast to install Easybeast and run System Utilities. Nothing else. On reboot from HDD, shows Apple loading screen then goes to grayish/white blank screen. If I tap power button then press "Enter" computer shuts off, so I know it's booting up to desktop.
Hardware:
Toshiba A105-S4074
Intel Core Duo CPU
Intel GMA950 graphics DevID: 27a2 (as shown in system profiler)
Intel High Def Audio, Audio ID 0 (as shown in system profiler)
Onboard Intel Ethernet and Wireless, I think. (I'll worry about these later)
Rebooted over and over again from iBoot and tried these MultiBeast options:
32-bit graphics enabler=No
PCI Root ID Fix with graphics enabler=Yes and No
Last but not least - When booting from iBoot, my Graphics and Sound work PERFECTLY with full graphics support! With that being said, there must be something that I'm missing, right? If someone could please help me out, I'd be very greatful! Thankssss!
------------------
EDIT:
Fixed it! Stumbled upon AnVAL and copied the boot file to root directory. Rebooted. Graphics works beautifully! Time to work on sound and Network.
My Problem Summary:
Installed retail 10.6.0 with iBoot Legacy and combo'd up to 10.6.6. Before reboot I used MultiBeast to install Easybeast and run System Utilities. Nothing else. On reboot from HDD, shows Apple loading screen then goes to grayish/white blank screen. If I tap power button then press "Enter" computer shuts off, so I know it's booting up to desktop.
Hardware:
Toshiba A105-S4074
Intel Core Duo CPU
Intel GMA950 graphics DevID: 27a2 (as shown in system profiler)
Intel High Def Audio, Audio ID 0 (as shown in system profiler)
Onboard Intel Ethernet and Wireless, I think. (I'll worry about these later)
Rebooted over and over again from iBoot and tried these MultiBeast options:
32-bit graphics enabler=No
PCI Root ID Fix with graphics enabler=Yes and No
Last but not least - When booting from iBoot, my Graphics and Sound work PERFECTLY with full graphics support! With that being said, there must be something that I'm missing, right? If someone could please help me out, I'd be very greatful! Thankssss!
------------------
EDIT:
Fixed it! Stumbled upon AnVAL and copied the boot file to root directory. Rebooted. Graphics works beautifully! Time to work on sound and Network.