- Joined
- Jun 21, 2019
- Messages
- 6
- Motherboard
- Asus > ASUS PRIME Z370-P II
- CPU
- i7 > 8700k
- Graphics
- Intel 8700k
Hi all,
I've done a fair bit of searching and found some potential solutions, but I wanted to reach out here as well.
I'm running Mojave 10.14.6
When plugging in the monitor via HDMI, the resolution was correct at 3440x1440, but it had the pink/magenta tint.
I installed the EDID Override to force RGB mode, but I was then stuck with a maximum resolution of 1920x1080
I am running with onboard Intel GPU/CPU graphics with my ASUS Prime motherboard.
Does any one of you have any advice or suggestions for this?
Many thanks in advance.
I've done a fair bit of searching and found some potential solutions, but I wanted to reach out here as well.
I'm running Mojave 10.14.6
When plugging in the monitor via HDMI, the resolution was correct at 3440x1440, but it had the pink/magenta tint.
I installed the EDID Override to force RGB mode, but I was then stuck with a maximum resolution of 1920x1080
I am running with onboard Intel GPU/CPU graphics with my ASUS Prime motherboard.
Does any one of you have any advice or suggestions for this?
Many thanks in advance.
