- Joined
- Jun 20, 2014
- Messages
- 1,015
- Motherboard
- Gigabyte Aero 15X v8-BK4K4P
- CPU
- i7-8750H
- Graphics
- UHD 630 / GTX 1070
using whatever doesn't seem to support clover's edid patch.
This is not the place to post issues with Clover or WhateverGreen.
using whatever doesn't seem to support clover's edid patch.
where should i post it? cant find issue section on githubThis is not the place to post issues with Clover or WhateverGreen.
where should i post it? cant find issue section on github
Done.Mods can you please pin this?
why its showing this sign after installing USBPower.kext into L/E/?USB Port Patching
1. Apply the Port Limit patch (in Patch->Advanced) then File->Export->Clover config.plist
2. Place the USBInjectAll.kext into EFI/CLOVER/kexts/Other
3. You may also need XHCI-200-series-injector.kext, XHCI-300-series-injector.kext or XHCI-x99-injector.kext depending on your Intel chipset
4. Reboot your machine and then run Intel FB-Patcher again
5. Go to the General->USB tab (see screenshot) and plug and unplug a USB 2.0 and USB 3.0 device into each USB port on your system. The ports that are active will remain highlighted
6. Set each port to the appropriate Connector using the drop down list
NOTE: HSxx ports connected to USB3 ports should be set to USB3. USB-C have two ports associated with them so you will need a USB-C device and plug it in both ways
7. Remove any unused ports using the Delete button
8. Use the Export button to generate a USBPower.kext onto your Desktop. Copy this file into EFI/CLOVER/kexts/Other
9. You can now delete USBInjectAll.kext and disable the Port Limit Patch
Q. What is USBPower.kext?
A. It's a Codeless Kernel Extension used to inject the USB ports
Q. Do I need SSDT-UIAC.aml?
A. No, this method uses a codeless kext
Thanks to vit9696 for demonstrating this method of USB patching
View attachment 346168
why its showing this sign after installing USBPower.kext into L/E/?