- Joined
- Jan 12, 2019
- Messages
- 3
Hello !
First I am not a english speaker. I will do my best to write correctly.
Well I have this project. I already started ...
I would like to instal High Sierra.
I have all stuff like Unibeat/Multibeast/Clover Configurator/EFI MOUNTER
What it seems to work on the process :
- Making the USB Boot with Unibeast
- I Can modify my BIOS (Warning : I have small bios setup utility, I can't disable/enable all specs asked on tutorial)
- I am actually plugged in HDMI to my motherboard and my SSD USB DRIVE (I made a partition of 16GB don't worry) is plugged in USB 2.0 port
- I can reach the First Apple Installation (with the disk utility one) if I press a "Enter" on the Grey screen (seems stuck but not) I get after the Apple logo/Progress Bar.
- I use the disk utility to Erase and format the SSD
- I continue with the Pre installation
- Now it's my first REBOOT, I press the same key to access at Clover Drives selection
- I choose not anymore the USB Drive, I go for the MAC OS BOOT (disk formatted with disk utility before)
- It reboot twice separate times and stuck at Apple logo/progress bar.
It wasn't easy to be actually on this progression , I did fix a lot of issues.
Here's my Clover Dir and all my verbose pictures.
Help will be very appreciate.
A big thanks to all persons trying to help me.
First I am not a english speaker. I will do my best to write correctly.
Well I have this project. I already started ...
I would like to instal High Sierra.
I have all stuff like Unibeat/Multibeast/Clover Configurator/EFI MOUNTER
What it seems to work on the process :
- Making the USB Boot with Unibeast
- I Can modify my BIOS (Warning : I have small bios setup utility, I can't disable/enable all specs asked on tutorial)
- I am actually plugged in HDMI to my motherboard and my SSD USB DRIVE (I made a partition of 16GB don't worry) is plugged in USB 2.0 port
- I can reach the First Apple Installation (with the disk utility one) if I press a "Enter" on the Grey screen (seems stuck but not) I get after the Apple logo/Progress Bar.
- I use the disk utility to Erase and format the SSD
- I continue with the Pre installation
- Now it's my first REBOOT, I press the same key to access at Clover Drives selection
- I choose not anymore the USB Drive, I go for the MAC OS BOOT (disk formatted with disk utility before)
- It reboot twice separate times and stuck at Apple logo/progress bar.
It wasn't easy to be actually on this progression , I did fix a lot of issues.
Here's my Clover Dir and all my verbose pictures.
Help will be very appreciate.
A big thanks to all persons trying to help me.
Attachments
-
EFI.zip3.2 MB · Views: 68
-
End of verbose.JPG3.4 MB · Views: 55
-
Grey Screen.JPG1.7 MB · Views: 40
-
Pre install screen after pressing ENTER on Grey screen.JPG2.7 MB · Views: 48
-
Verbose quick log before rebooting when tring to install MAC OS from the drive i prepared from...JPG2 MB · Views: 61
-
Apple logo stuck.JPG1.7 MB · Views: 42