[Partial Success] Z77X-UD5H, i5

[kuruvi]

There's no guide here for installing ML on Z77X-UD5H, that's y I made this though it's not 100% perfect.

1. Updated BIOS to F8 (Installed Windows 7 using wintoflash usb method, downloaded Biosupdate F8 & @bios from Gigabyte, installed @bios, unpacked F8 and used @bios to update the bios)
Comment: I don't know if this plays a role or not

2. Installed ML using Unibeast method

3. I ran Multibeast three times
Comment: When ever I run Multibeast I check on system utilities, I don't know if it really matters or not
1-st run: DSDT, system utilities, Patched AppleHDA/ALC898, maolj's AtherosL1cEthernet, MacPro 3,1 (Reboot)
Comment: DSDT installs all the necessary kexts like fakesmc.kext, etc. Read the details in Multibeast. Sound didn't work so I went on second run to fix this.
2-nd run: system utilities, Non-DSDT HDAEnabler/ALC898 (No Rebootj, sound works)
Comment: Just to enable sound, Headphone jack didn't work, but two rear side ports are working.
3-rd run system utilities, Misc/patched…/OS X 10.7.4 Ivy Bridge (Reboot)
Comment: may be it's useless, I was thinking this may fix issues with sleep & shutdown

3. Enabled inbuild HD4000 by running Chimera (Reboot)

Now I had two major issues; sleep and shutdown doesn't work, here's the simple fix

4. Enter BIOS setting and change the following
Peripherals:
xHCI mode is set to Auto
make sure that xHCI and EHCI Hand-off is enabled
Init Display First IGFX

Power Management
A little tip here is to disable Wake on LAN

5. iCloud works for following this guide

http://www.tonymacx86.com/mountain-...3-icloud-mountain-lion-issue-unable-sign.html

What is working:
inbuilt graphics, sound only from two ports, sleep, shutdown, iCloud, apple store, software update

I can't get my Asus bluetooth toggle working, I don't have kext for this. I didn't check USB 3, HDMI, Firewire, etc

I have included the screened of Multibeast, hope this helps newbies

HD is connected to SATA 3 port rather than STATA6 port, somewhere in the forum it's suggested to use SATA3 port.

Useful links
http://legacy.tonymacx86.com/viewtopic.php?f=16&t=65691
http://www.tonymacx86.com/99-quick-guide-configuring-uefi-gigabyte-s-7-series-lga-1155-boards.html
http://www.tonymacx86.com/general-tuning/58288-i7-3770k-ga-z77x-ud5h-share-your-best-practices.html

 

[kuruvi]

I have ASUS USB-BT211 Bluetooth dongle which is not working with this build. It'll be great if anyone can help me to get fixed; may be some kext file!!. Thanks