"no vram variable" despair

[Cel]

That is Clover Configurator not Clover.

Ah! That's why ^^

So I got FakeSMC.kext version from downloads and OsxAptioFix2Drv-free2000.efi from nockwoodhams.com

I replaced the kext, added OsxAptioFix2Drv-free2000.efi into drivers (removed OsxAptioFix2Drv.efi) and relaunch.
I'm back with the no vram variable =/

 

[P1LGRIM]

So I got FakeSMC.kext version from downloads

Still 2017.
Try here : https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/
Remove z390-usb.aml and Z390-phantom-gaming-USB-config.dsl from /EFI/CLOVER/ACPI/patched

 

[Cel]

I got the one from the link you gave me, removed the files you told me and relaunch, still "no vram variable".

They're several FakeSMC in the folder (with underscores). Should I add all of them in my Clover?

Is there a BIOS/UEFI setting I might have fail?

 

[P1LGRIM]

they're several FakeSMC in the folder (with underscores). Should I add all of them in my Clover?

You need the one called FakeSMC.kext, nothing else.

Is there a BIOS/UEFI setting I might have fail?

Maybe.

You might try adding npci=0x3000 to your boot arguments.

 

[Cel]

You might try adding npci=0x3000 to your boot arguments.

I have try, and still got the no nvram variable problem =/

(I entered "npci=0x3000" after my "-v" command in boot args.)

 

[BreBo]

I have try, and still got the no nvram variable problem =/

You might want to try to update/downgrade your BIOS.
See New MSI BIOS update breaks Hackintosh?
See post #15 of Mojave install on MSI Z390, i7-8700K, Vega64, NvmE

 

[Cel]

Hi,

So I downgraded BIOS today and finally passed through the "no vram" problem.

However, I'm unfortunately not done, after a few moment loading, there's a new one!

The screen freezes and a fail symbol appears... I can read "no boot device".

I remember reading similar problem but can't remember where...

 

[P1LGRIM]

I remember reading similar problem but can't remember where...

Search for "still waiting for root device".

 

[Cel]

Thank's!

So I used USB2 instead of USB3 and finally reached mojave installer! *yes!!*

Got an issue with SSD not found but ran Disk Utility an fixed the problem.

However, I'm facing an issue I didn't see coming...

"The target disk is too small for this operation"... I have a 120 Go SSD (witch is the same capacity as the one in my MacBook Pro...).