Contribute
Register

[solved] MSI GE62 6QC able to boot Clover but fail to load OSX installer

Status
Not open for further replies.
jackkhor said:
boot into clover.. choose install Mac..
Click to expand...

Your EFI/Clover is not per guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

drivers64UEFI is missing EmuVariableUefi-64.efi (or you could use AptioMemoryFix.efi instead of OsxAptioFix*.efi)
kexts/Other is missing SATA-100-series-unsupported.kext. USBInjectAll.kext may also be helpful. FakeSMC.kext and VoodooPS2Controller.kext are not builds recommended in the guide.

And you forgot to press F2 and F4 as per FAQ, "Problem Reporting".
Please read it again for next time:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
 
RehabMan said:
Your EFI/Clover is not per guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

drivers64UEFI is missing EmuVariableUefi-64.efi (or you could use AptioMemoryFix.efi instead of OsxAptioFix*.efi)
kexts/Other is missing SATA-100-series-unsupported.kext. USBInjectAll.kext may also be helpful. FakeSMC.kext and VoodooPS2Controller.kext are not builds recommended in the guide.

And you forgot to press F2 and F4 as per FAQ, "Problem Reporting".
Please read it again for next time:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
Click to expand...

sorry but i don't understand the F2 F4 thing...
RehabMan said:
Attach EFI/Clover folder as ZIP (press F2 then F4 at main Clover screen just before collecting)
Click to expand...
u mean boot into clover than press F2 F4??
 
jackkhor said:
sorry but i don't understand the F2 F4 thing...
Click to expand...

As per FAQ...
You must press F2 and Fn+F2 and F4 and Fn+F4 at the main Clover screen before pressing ENTER to boot in order to collect/extract misc/preboot.log and ACPI/origin/*.
 
RehabMan said:
As per FAQ...
You must press F2 and Fn+F2 and F4 and Fn+F4 at the main Clover screen before pressing ENTER to boot in order to collect/extract misc/preboot.log and ACPI/origin/*.
Click to expand...
ok.. i think i know.. will try that later..

RehabMan said:
Copy essential kexts to the 'Other' directory (FakeSMC, VoodooPS2Controller). You only need the kexts that allow you to boot and operate the installer. Other kexts that you might use in the final installation can wait.

I always use my own versions of these kexts:
FakeSMC.kext: https://github.com/RehabMan/OS-X-FakeSMC-kozlek
VoodooPS2Controller.kext: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller
Click to expand...
cannot find this two kext on the given links.. nor the SATA-100-series-unsupported.kext & USBInjectAll.kext
 
oh wait.. sorry i think i found them builts..
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top